CSH24GRXAAA Hotpoint Refrigerator - Instructions

I watched the Utube video, repeated the process at home while awaiting the part, and installed the flapper door in about 15 minutes after it arrived--piece of cake. The hardest part was removing the escutcheon plate on the front of the freezer door. I figured out I could slide a putty knife under it and the rest of the project was completed in no time at all.

It never occured to me that those tracks could be taken out and given a good cleaning. We would take the drawers out and clean them, but trying to clean the tracks of the brackets while in the refrigerator was clumsy and ineffective. I also thought the appliance was too old to get parts for. When the bracket broke, I decided to see what I could find on the internet before going out to buy a new refrigerator. Taking everything out of the fridge and removing and properly cleaning everything took quite some time and effort, but actually changing out the part was easy. It would have been even easier if I had a magnetic screwdriver, but I managed without one.

Very easy to repair. Make sure you have a block of wood the distance from the floor to the refrig door so the door does not fall on you. Remove the two bolts holding the door and carefully lift the door away from the fridge and lower it so it clears the top hinge. Carefully lay the door on it's side so you can remove the other two bolts and the other hinge. Remove the plastic refrig dairy door so it does not fall on the floor and crack when you remove the refrig door. Reverse the process to assemble.

Replaced the gasket and the hinge assembly. Replaced the hinge assembly on the freezer door as well since it was worn. YOU DO NOT NEED A DREMEL to cut anything. People doing that are trying to save $10 but don't do it. Just order the hinge assembly. It comes with the loose cam riser and the second cam riser that is attached to the hinge. DON'T CUT ANYTHING. Super easy. I prepped the door for the hinge replacement the night before. Removed fridge magnets, etc. Moved everything from inside the door to the shelves. Got home from work (package was there in two days, fast) and it took 5 minutes for the Fresh Food Door hinge replacement. Removed hinge cover, removed 4 hex screws (two on top and two on bottom). Swapped hinge and cam. Be sure to use the cam that came with the hinge. Always replace in pairs. Freezer was more tricky. Turned off water. Had to remove a clip (small phillips head screw) on the white tubing. Unscrewed plastic nut. Pulled off spring from tubing. Set spring, nut, and clip with screw aside. Removed hinge cover, unplugged electronics, removed 4 hex screws (two on top and two on bottom). Swapped hinge and cam. Super easy.

ordered new parts , came in 2 days and just made the repairs today and took only about 15 min total time all the parts fit right on and the only problem was holding the door and stting it on the lower rod, But my wife helped on the lower end. all in all it went great. Great servic and great parts. Bert Hoffman 79 years old

Replaced auger and front helix kit.

Removed screwes of old part and re installed new part. Easy

Reviewed the video on the website and followed the detailed instructions provided. What really surprised me is that the part arrived the following the day after placing the order, obviously faster than the advertised average of 1.8 days using standard shipping. And the price of the parts was rather inexpensive.

The flapper on the ice chute was curled up and not creating a good seat, so the chute kept clogging up with frozen condensation, especially during the humid summer months. The online video made it so easy to replace the part myself. I was able to fix the problem in under 15 minutes and at a fraction of the price!

Took out one hex screw, disconnect electric couplings, pulled original ice maker out and found that the water supply line to the ice maker was frozen solid as well as the shute cup. Used hair dryer to thaw out the line and the cup reinstaled old ice maker and it worked fine. Did not have to use the new part at all at this time. Am keeping new part for future use.

Watched the video. Piece of cake, easy as pie.

Easy easy easy. Pulled the refrigerator out. Took off the old valve, cleaned around the connection, installed the new one, connected the tubing, turned on the water, connected the electrical connections, plugged it back in, checked for leaks, and walla...got water...Thanks for the help and great service. I even received the valve shipped standard delievery via Fed ex couldn't afford the overnight, and received the part next day... GREAT!!It took me 15 minutes to complete.

I followed the video instructions to the letter and it was very easy and a total success. I believe I would have had problems but for thr video demonstration which was very clear and straight forward in a simple manner. Thanks for the prompt delivery of the part and the help installing it.

Looked at the instructional video and read previous customer comments. Didn't have to dissassemble rear of freezer door. Access through the front once trim ring and circuit board removed. Could not have done it with out the video/and or previous customer comments. Part was shipped and received immediately. Repairs complete! No more frost developing and plugging ice chute! I especially appreciate the customer comments on how to complete this repair!

All I had to do was remove four (4) screws from the old ice bucket assembly to remove the front cover and attach it with the existing screws to the new ice bucket assembly. It was a very simple repair. Thanks for the expedient delivery and the exact replacement part that I needed.