Quick Question!

Have you ever purchased from PartSelect.com before?

Models > CSF24KMD > Parts

CSF24KMD Hotpoint Refrigerator - Parts

All parts for the Hotpoint Refrigerator CSF24KMD

Below is a list of all parts for the Hotpoint Refrigerator CSF24KMD - Side-by-side. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the CSF24KMD
1-14 of 362
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$13.22

Package of 12 Screws

$12.51

Door Shelf Retainer Bar End Cap

$12.34

Evaporator Fan Blade Kit

$4.56

1/4 Tubing Nut

This is a quarter tubing nut and is sold individually. The tubing nut works in conjunction with your refrigerator/freezer and is made entirely of plastic. The function of this part is to connect the lines that supply water to your ice maker and water dispenser. The most common reason or needing to replace this part is if fluid is leaking from the water line to your icemaker or water dispenser. The tools you will need to make this repair include a nut driver, a pair of pliers, and a screwdriver set.

$8.01

Screw

Comes 12 in a pack.

$4.54

Fill Tube Clamp

The fill tube clamp is used in refrigerators to support the water tube. If the tubing or hose is working but is loose inside the unit, the clamp could be broken or damaged. If this is an issue your refrigerator is experiencing, replacing the clamp can be the solution. These tube clamps are sold individually and the screw is not included. Make sure to unplug your refrigerator from the power source before installing this part. Refer to the manual provided by the manufacturer for further instructions on this repair.

$3.94

SCREW

Size: 10-16 ab. * Part may differ in appearance, but functions same as original. Sold Individually.

$125.53

Condenser Fan Motor

This condenser fan motor operates in a clockwise fashion. The fan itself has two 1/4 inch spade terminals. It carries 2 watts and 115 volts. This motor NO longer comes with cover for terminals.

$7.42

Retainer Bar End Cap

$151.76

Evaporator Fan Motor - Harness NOT Included

This evaporator fan motor operates in a counter clockwise fashion. This motor's shaft is 3/8 of an inch and the motor has two right side terminals. NOTE: Harness wires NO longer comes with the part.

$13.74

Rear Wheel

This rear wheel is sold individually. The wheel pin is not included with this roller.

$9.03

Hinge Shim

$25.75

Fill Tube Extension

This is a fill tube extension only.

$12.41

Screws - 12 per package

Size - 8-18 ab

All Parts for the CSF24KMD
1-14 of 362