Models > CSF24KMD

CSF24KMD Hotpoint Refrigerator - Overview

Get Parts and Repair Help for CSF24KMD

If you know the refrigerator repair part you need, you can browse the list of all parts on the CSF24KMD, or you can search by name or part description. You can also find your part by where it is located on the CSF24KMD by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$11.54

Package of 12 Screws

$3.62

1/4 Tubing Nut

$9.96

Evaporator Fan Blade Kit

$10.89

Door Shelf Retainer Bar End Cap

$3.62

Fill Tube Clamp

$7.05

Screw

Comes 12 in a pack.

$6.20

Retainer Bar End Cap

$3.00

SCREW

Size: 10-16 ab. * Part may differ in appearance, but functions same as original. Sold Individually.

$22.62

Fill Tube Extension

This is a fill tube extension only.

$2.36

Grommet - Black

Sold Individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Wouldn't cool

  • Customer: Clarence from Great Cacapon WV
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 13 of 17 people found this instruction helpful
I removed the 3 screws that held the motor and fan. Exchanged fan blades and reinstalled the fan and new motor

I was surprised to find the motor. The refrigerator/freezer was over 28 yrs old. Works fine now read more

Noisey fan/motor (bad motor bearing ?)

  • Customer: Keith from Fort Worth TX
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 10 of 12 people found this instruction helpful
Removed 2 phillips head screws to remove ice maker (could have just loosened them)
Pulled fan off of shaft
Removed 2 phillips head screws on motor bracket , disconnected three motor wires & removed motor.
reversed process to install new motor & fan blade.
Space was a little tight for two hand and arms, but do-able. read more

Noisy Fan Motor - Bearing went out.

  • Customer: Robert from Carpinteria CA
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver
  • 9 of 12 people found this instruction helpful
Moving the frig out and cleaning was the hardest part of this job - lots of dust collected over the 17 years the frig was in place. Once all the cleaning was done, with the frig out and back cover off (10 -12 screws taken off with nutdriver),I plugged the frig in and observed the the problem was a noisy fan motor. The motor is at the very back of the frig wi... read more