CEW2760AN0 Whirlpool Dryer - Instructions

This dryer refuses to die and I am happy to keep it that way. Door latch was replaced in less than a minute using this kit. Easiest repair ever.

Slipped screwdriver on top and bottom of catch and pullef out. Pressed new catch in plact. Job finished.

Extremely simple to remove key cabinet covers & remove driveline / drum - have done various other repairs / part replacements on this unit durign past 20 yrs, took longer the 1st time to find specific disassmbly needed/not, but turns out to be quite few & easy. Replaced idler pulley & belt, cleaned all old dust, oil, rubber particles from cabinet, re-greased drum roller bearings - though new rollers were ordered, I elected not to use them since the existing bearings were fine after cleaning & greasing. Simple re-assembly is reversal of dis-assembly process.

Removed two small screws on door edge, pop out broken part, insert new part, replace screws. Took 2 minutes 18 seconds. Nice to have various door catches in the Kit. This was a repair on a 1979 Whirlpool Dryer. Great price & service!!

Simply slid new idler wheel on then popped thr tri ring on. The belt replacment was the hardest thing which was also easy. I think pulling the dryer away from the wall was the most difficult thing.

Upon receipt of the new vent kit, I removed the dryer from its location and took it in to the garage. This facilitated a roomier work space. The directions were easy to follow and the work to be performed was very easy in this setting.

Our make/model was not on the online instruction, but it was similar. Ours had a glass (plastic)front window in the door. To remove the top catch you had to take out the top four screws that hold the door together (philips head screws) allowing you to pull back the gray plastic strip to access the top latch, then replace it like in the online directions using a needle nose pliers. The bottom catch, once the two remaining the screws were out gives you access to the bottom catch. Remove it with the pliers and snap the new ones into place. You can completely take out the window when you replace the bottom latch if you want.

Just pulled the old parts out on door latch and put the new ones in. Thanks Parts Select for your prompt response and easy process for order and shipment.