CDB4000TQ0 Dishwasher - Instructions

Instructions very easy to follow

I looked up my problem on your site and it took me to the parts most common for that problem. Your site listed the exact parts needed for my model. Got the parts and followed the direction on posted on your site by Andy.The parts were right on when I got it apart the impeller was locked up. Changed the parts without a any additional problem also took the check valve off of the underside front where the drain hose connects and cleaned it. The check valve had string and a tooth pick stuck in it. After all that hook water back up ,turned power back on and it works like a charm. Great site, parts are reasonably priced. Thank you Danny

i took the inside door off and took the 2 switches out and replaced them; not too difficult.

I read everyone else's fixes, which were very helpful but my solution of removing the plastic from the motor shaft was a lot easier than others. I simply used side cutters and made two cuts into that plastic piece and it Fell of. much easier than the person using several Dremmel blades to cut it off.. That was the most difficult phase until I grabbed my ole phone company side cuts and just cut it off in 15 seconds. Thanks for all the other tips. I love dealing with Parts Select, Fast and efficient. Jim W

we followed your instructions submitted via e-mail and they worked out just fine....thank you

Started down Parts Select list of possibilities. Replaced the door gasket (1/2 hour), still leaked. Replaced water deflectors (15 min), still leaked. Was looking at steam vent and read the repair submitted by "mary from Fountain Green UT". Removed and thoroughly cleaned the steam vent (1/2 hour). Stopped leaking and is working fine now. Repairs were very easy using Parts Select instructions.