Models > BWXR473EV0AA > Parts

BWXR473EV0AA General Electric Dryer - Parts

All parts for the General Electric Dryer BWXR473EV0AA

Below is a list of all parts for the General Electric Dryer BWXR473EV0AA - Electric . To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the BWXR473EV0AA
1-14 of 92
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Drum Bearing Slide - White

Sold individually. There are 2 per dryer. They attach to the outer-most sides of the bearing. Manufacture recommends to replace both slides at the same time.


Duct Felt Seal

May differ in appearance but functions same as original.


D-Shaped Knob Insert Clip

Sold individually.


Drive Belt

This drive belt is 89.5" long.


Front Drum Bearing

Note: The drum slides should also be replaced when your replacing the drum bearing. Slides are NOT included. This part helps your dryer operate as quietly as possible.


Lint Filter and Frame

This filter collects lint as it passes through the dryer vent.


Rear Drum Bearing Kit

This rear drum bearing kit comes with a shaft, bearing and installation instructions. The bearing plate comes with a slot in it for the ground strap. Helps keep your dryer running...


Idler Pulley Wheel

A dryer's idler pulley wheel serves to help the belt to rotate the drum.


Cycling Thermostat - 4 Wire

This thermostat helps to regulate the dryer's internal temperature. L210-30F


Interlock Switch

This part is a simple on/off mechanism that prohibits the appliance from operating when the door is open.


Lint Trap Duct Assembly

This part includes the duct felt seal (PS9861764) and gasket (PS2577674). NOTE: Per manufacturer this part no longer comes with the sensor bars.



This part helps to keep the door closed while the machine is running.


Door Strike


Heating Element and Housing

Note: The insulators on the housing are NOT sold separately.

All Parts for the BWXR473EV0AA
1-14 of 92