Mon-Fri: 7am-1am EST / Sat-Sun: 7am-11pm EST
Below is a list of all parts for the General Electric Refrigerator BCS42ELC. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.
This valve comes with 1/4" compression inlet.
NOTE: This part comes with new quick connections. To install - cut retaining nuts off of existing plastic water lines and gently push...
This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.
This defrost timer will cycle for twenty-five minutes after every six hours of run time. The timer itself is made of plastic, and its terminals are bent, the leads are internal, an...
This part comes with 3 round pin connection terminals.
This fan motor circulates the air through the refrigerator grille and cools the compressor and condenser coils. It also helps to evaporate extra water in the drain pan.
The start relay briefly boosts the compressor, and then shuts off as soon as the motor gets up to speed.
This evaporator fan motor operates in a counter clockwise fashion. This motor's shaft is 3/8 of an inch and the motor has two right side terminals. NOTE: Harness wires NO longer comes with the part.
Used to help hold the compressor in place. They are sold individually.
This defrost thermostat kit comes with the installation with wires, mounting brackets, and wire connectors. L45-20.
This part should be installed by an appliance repair person as it could be dangerous. This part may be used to help prevent your evaporator fan from becoming blocked with ice. This part also insulates the evaporator coil area so you don't get a buildup of ice in the damper area.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2015 , Eldis Group Partnership. All rights reserved.