Models > ATF7000FE0 > Parts

ATF7000FE0 Frigidaire Washer - Parts

All parts for the Frigidaire Washer ATF7000FE0

Below is a list of all parts for the Frigidaire Washer ATF7000FE0 - Residential WASHER. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the ATF7000FE0
1-14 of 130
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Door Lock and Switch Assembly

***NOTE: As per the manufacture, some models require a new wire harness and a door strike for this door lock assembly to work on the appliance. The original style lock would requir...


Shock Absorber Kit

This kit is used for front load washers and includes 2 dual-stage shock absorbers, 1 spare shock mounting pin and 4 locking nuts. These shock absorbers keep the washer from vigorous shaking during it's cycles.


Door Striker

This part is found on the door of your washer and keeps your door closed for use.


Drain Pump - 60Hz 120v

The pump is what your washer uses to remove the water from the tub. This part is the pump and motor assembly which includes the red flapper to prevent drain back flow.


Door Hinge with Bushings

This part attaches to the outside of the front door panel to help with the door open and closing properly.


Water Inlet and Dispenser Valve

This part comes with the sensor/thermistor.




Drain Hose

Also known as tub-to-pump drain hose.


Drive Belt

This drive belt is made to slip on the motor pulley to bring the basket up to the speed required and this makes the belt get wear and tear.


Dispenser Drawer


Drum Vane Kit


Spring-Held Bellow Clamp




SCRW, 10-16 X .75

All Parts for the ATF7000FE0
1-14 of 130