ATF6700FS2 Frigidaire Washer - Instructions

Took the back off and installed the belt tight but ezsy to do

The parts arrived quickly! Partselect is great to work with! Found the new shocks are different; evidently a design change bt Electrolux. The new shocks have free movement before dampening, approx 3/4". Bottom front cover removed, puch in the tab on side of pin then push the pin out. I had difficulty getting the pin to go back in through the new shock but it was ok after I pushed harder. I tried the washer and was very disappointed. Harsh banging when spinning. It was obvious to me that the original shocks had failed as a result of whatever was still wrong with the washer. A search on the internet and I found that the inner tub support structure that is on the back of the inner tub develops cracks and or breaks and then when it spins, lookout! It bangs so violently that I think the washer will beat you out the back door! I chose not to repair the washer due to age and cost of repair. A quick check to see if yours has that problem: look inside the washer and you will see three places on the rear wall of the inner drum( the part that spins). Grab the inside lip of the drum near the front door right in line with each of the three places and pull toward you. You should have no movement. Mine had movement on one out of three, indicating that the support was broken. Good luck.