Quick Question!

Have you ever purchased from PartSelect.com before?

Models > AT23M9A (DD98A) > Parts

AT23M9A (DD98A) Admiral Refrigerator - Parts

All parts for the Admiral Refrigerator AT23M9A

Below is a list of all parts for the Admiral Refrigerator AT23M9A. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the AT23M9A
1-14 of 42
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.88

Light Bulb - 40W

This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these repla...

$11.11

Light Rocker Switch

This light rocker light switch is used in a number of household appliances. It is most often found in refrigerators and freezers. This is a simple mechanism that helps turn the light in your appliance on and off. If the door of your appliance is open the light should be on, and if the door is closed the light should be off. Your appliance door is opened and closed frequently, meaning the mechanism may wear out over time. It is not uncommon that this part will need to be replaced. You may need a putty knife to release the mounting tab and remove the faulty rocker switch. To install the new one, simply attach the wires and snap it into place in the liner of your refrigerator or freezer.

$4.63

Screw

Sold individually.

$96.92

Cold Control Thermostat

This cold control thermostat has a temperature range from 37 degrees Fahrenheit to 27 degrees Fahrenheit and a capillary length of 29 iches. This cold control thermostat cycles on and off regularly to keep your refrigerator cold.

$5.86

Adjustment Screw

Sold individually.

$22.56

Temperature Control Knob

Sold individually.

$17.76

Control Knob

This is a freezer damper control knob.

$19.35

Leveling Leg

This is an OEM part that is made of metal and sold individually. The leveling leg is generally used with refrigerators, dryers, freezers, ranges, cooktops, and microwaves. The leveling leg is meant to keep your appliance steady and level to the floor. If you notice your appliance is uneven to the floor it may need to have the leveling leg replaced. You will notice that the bottom of the leveling leg has a smooth surface to ensure moving your appliance does not require as much effort. This part screws into a pre-drilled hole underneath the appliance.

Single Lamp Socket Kit

NOTE: This is now the single lamp kit socket. The dual lamp kit socket is no longer available.

Lower Kickplate Retainer Clip

NOTE: This clip is sold individually. Two of these clips are required per kickplate. This part is required to hold your kickplate in place.

SCREW

SCREW

Wheel Pin

This wheel pin is just over an inch long, and is made entirely of metal.

TAPPING PLATE, WHEEL

All Parts for the AT23M9A
1-14 of 42