Models > AS20M7A > Parts

AS20M7A (DN02A) Admiral Refrigerator - Parts

All parts for the Admiral Refrigerator AS20M7A

Below is a list of all parts for the Admiral Refrigerator AS20M7A - MFG number DN02A, REF - SXS. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the AS20M7A
1-14 of 200
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.52

Light Bulb - 40W

Sold individually.

$107.31

Ice Maker

This replacement ice maker mechanism does NOT come with a cover, a wire harness, or the mounting hardware. Must be ordered separately.

$30.70

Condenser Fan Motor Kit

This condenser fan motor operates in a clockwise fashion and carries carries 2W and 115V. It comes with screws, a blade mounting nut, and a cushion. This part provides forced-air ...

$2.70

Screw

Sold individually.

$2.70

Screw

This screw is sold individually.

$7.87

Light Rocker Switch

$15.05

Water Fill Cup and Bearing

$2.70

Hose Clamp

$2.03

Screw with Washer

This metallic screw is less than an inch long and comes with a plastic washer.

$27.92

Defrost Heater

This set includes two nine and a quarter inch radiant glass defrost heaters joined together with wire. Each heater carries 500 watts and 115 volts. The defrost heater heats the evaporator in the defrost mode of operation to keep the cooling coils from frosting over.

$55.91

Defrost Timer

This refrigerator defrost timer will cycle for twenty-one minutes after every ten hours of run time. The defrost timer acts like a clock. It continually advances and alternates b...

$35.74

Single Outlet Water Valve Kit

The water inlet valve is a solenoid-operated switch located at the bottom of the refrigerator. When it is energized by electrical power, water is released from the supply line through the water valve and into the compact icemaker mold. ***Please NOTE: This part has been redesigned and may appear different than the original. It has a new quick connection. To install: cut the retaining nut off the existing water line and gently push into new valve. To remove: depress the ring that the tube slides into.

$2.70

SCREW

Sold individually.

$24.48

Thermostat with Clips

This part is also known as the cycling thermostat and this bi-metal device controls the activation of the icemaker ejection cycle.

All Parts for the AS20M7A
1-14 of 200