Models > ARS8267BB > Instructions

ARS8267BB (PARS8267BB0) Amana Refrigerator - Instructions

All Instructions for the ARS8267BB
766 - 769 of 769
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Light socket not working
Pull out plastic cover #13of refrigerator part discription (temp. control and light socket), snap out old light socket and replaced with new light socket. light is now working.
Parts Used:
Light Socket
  • Romeo from Edinburg, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
The original drawer was broken
Short story: excellent experience. Long story: The original drawer broke, probably because it was overloaded during the years of use. I found the part number very easily on parselect.com. Just followed the instructions on the web site. Got the replacement very quickly, and it was broken in the box. Called PartSelect and they sent my another replacement immediately. No need to send back the broken one, no extra cost, no question asked. I got the new part in a few days. This time they took the time of carefully placing the original box in another larger package with plenty of shock-absorbing material. Changed it in no time. The service was excellent, the person who took my call was extremely nice and efficient. I strongly recommend PartSelect.
Parts Used:
Crisper Pan - Large
  • Marco from Chandler, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Ice maker drips water, making a blob of ice in the compartment
Empty out freezer loosen two top screws and took out bottom screw. Lifted out ice maker and unplugged wire. Took bailing arm and plug and put on new ice maker and reverse the process. Had ice in three hours and no leaks.
Parts Used:
Replacement Ice Maker
  • Charles from Metairie, LA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Old ice maker element burnt out
Removed wiring from old ice maker and install on new. With 2 screws all ready in place hung ice maker on them. Attach wire connector into socket and install bottom screw to hold ice maker. Tighten top 2 screw and put wire guide in place. Drop wire guide down and ice started in 10 mins
Parts Used:
Replacement Ice Maker
  • David from Bonita, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the ARS8267BB
766 - 769 of 769