Quick Question!

Have you ever purchased from PartSelect.com before?

Models > ADE20L2A > Parts

ADE20L2A Admiral Dryer - Parts

All parts for the Admiral Dryer ADE20L2A

Below is a list of all parts for the Admiral Dryer ADE20L2A - Residential. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the ADE20L2A
1-14 of 90
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$43.29

Heating Element Kit - 240V 4750W

This dryer heating element kit is 240 volts and 4750 watts. The kit comes with a high limit thermostat of L248-80. The function of the heating element is to produce the heat that a...

$50.03

Rear Drum Support Roller Kit

The rear dryer drum roller functions by holding the drum in place while the drum rotates on support wheels during the drying spin/tumble cycle. Included in this rear drum support roller kit are four screws, one spacer, two washers, two retaining rings, two rear rollers, and two cylinder support shafts. The drum support roller kit may need to be replaced if the dryer is noisy or will not tumble. Important note: This kit has been updated by the genuine manufacturer to have one spacer that is the thickness of two spacers. Please search by model number to get these parts separately.

$16.18

Rear Drum Support Roller

This rear drum support roller stabilizes the dryer drum and holds it in place during the drying cycle while the drum rotates on the support wheels. If your dryer is making loud squ...

$5.81

Blower Wheel Clamp

This blower wheel clamp, used in a clothes dryer, is a clamp that holds the blower wheel to the motor shaft. This part helps hold the blower wheel in place to function easily and properly. If your clothes dryer has any of the following symptoms then replacing the clamp can be a solution: making loud noises, not producing enough heat or no heat at all, and/or clothes are taking too long to dry. Make sure to unplug thedryer from power source before installing this part and refer to the installation instructions provided by the manufacturer for further guidance.

$3.02

Screw

This screw is sold individually.

$44.71

High Limit Thermostat (Limit: 258-80)

This high limit/safety thermostat is used on many gas and electric clothes dryers. It is made of metal, and is almost two inches long. With this thermostat, a dryer's heating element will cut out if the internal temperature reaches 258 degrees Fahrenheit. The element will kick back in when the temperature drops to 178 degrees Fahrenheit.

$22.41

Thermal Fuse

$5.10

Timer Resistor Assembly

This timer resistor assembly is two inches long. It is made of ceramic and metal.

$43.86

Front Glide Kit

This kit includes 2 glides (left and right), 2 pads with adhesive backing and 1 support brace.

$12.05

Drum Glide and Cushion Kit

Pad has adhesive backing.

$5.96

Retaining Ring

This retaining ring is well under an inch long. Made entirely of metal, this ring is intended for use with some clothes dryers.

$29.47

Blower Wheel

This is a beige blower wheel that is made of plastic. Manufactured to fit a 1/'2 inch motor shaft, this blower wheel is 3-1/8 inches deep, and the diameter of the wheel is 7-1/8 inches.

$3.02

Screw

This screw is sold individually.

$5.10

Screw, 8/18 x 3/8

This screw is sold individually.

All Parts for the ADE20L2A
1-14 of 90