ADB2500AWS Amana Dishwasher - Instructions

The repair was so easy. I just unscrewed the inner door panel , unplugged the old latch, attached the new and put the panel back. Thanks to all the other comments which gave me the confidence to attempt this repair. The hardest part was disconneting the old electric connections but with a little bit of "coaching" they came off OK. Thanks again.

Removed the screws that attach the inside of the door, keeping them in order. Two are longer. The part is loose at that point and the wires un clip with a little pull with a needle nose. Replaced with the new part, re screwed and good as new. oh and turned off the breaker before disassembly.

I had to force the door open, the latch was broken . This was the second Latch that has failed The previous time it cost me $90 plus several days to have it repaired.
I ordered the part on line about noon. The next morning UPS was at my door with a package. Talk about great service !
The install was a breeze, took about 15 minuets to remove about 8 screws and the old part and replace with the new part. Total cost was about $30...and very little down time. Great service, great company to work with !

I first took of the inside door panel approx 9 screws. The latch assy was the top of the door panel that I took off. Took the wires off both side of the assy and attached them to the new assy. I re-attached the inside door panel. it was a very easy fix. No other dealers in the area had the part. I order the part from parts select and was back in action within three days.

I ordered the part, unscrewed the door, installed the new handle, and put it all back together again.

Pushed them on

Removed the 11 torx screws from the door panel and separated the inner door from the outer panel to expose the latch mechanism. Killed power to d/w, unplugged the two interlock switches from the old latch and removed it. Installed the new switch assembly and reconnected the switches. Easiest repair job ever - took less than 10 minutes. Only catch is that you need a T-20 torx driver for the screws.

Added toe panel and insulating strip.

After truning off the power, I removed the inside door panel by unscrewing the 11 screws. Next unplugged the latch assembly from the two electrical connections. Connected the two electrical connection to the new part and reinstalled the inside door panel. The only difficulty was that the first part I ordered did not have a handle as part of the assembly.

Before starting the job, I looked at the information provided from others who had the same problem and had successfully installed the new part. The information provided was the reason I chose your company to purchase the part. THANK YOU!
1. Turned off power
2. Removed screws holding inside of door.
3. Disconnected and removed old part.
4. Removed dishwasher door handle and attached to new part.
5. Connected new part and positioned it in the handle insert. (Be sure the small bars holding it together are firmly in place.)
6. Reattached the door.
Here is the problem: I did not realize I also needed a new door handle as I assumed it would be attached to the new door latch assembly. My door handle is cracked and some of the plastic has broken away. I will now have to order the new handle and pay the cost of shipping that would have certainly been less if I had ordered it in the first place.

i deinstalled everything in the ground of washer so that i saw the e motor
take of the part from the motor and install your new part
and reinstalled everything

Remove all screws on inside panel disconnect wires remove switch

I installed additional wheels that had broken off. This was on my elderly mother's dishwasher in Iowa. I was visiting from California for a week when I discovered it was broken. I worried about getting the parts because I was not familiar with the area. PartSelect saved me by getting the parts delivered before I flew back to California. It was really great. Thanks,

Internal door panel must be completely removed taking care to uncouple all electrical connectiones as you go. Some connections can be very stubborn so take care and be sure to cut all power to the appliance before starting. Replacing the handle and latch from this point is very easy.

Ordered the latch part Friday A.M., Saturday afternoon it arrived. My wife repaired it while I supervised. (She doesn't have a tool belt yet). It took longer to pry off the 2 switch connectors than it took to remove and replace all the screws. They were on there pretty good, so we used extra care. Now she's my "Handygirl". Works great. The price was lower than I could find locally too. Thanks for great service.