ADB2200AWW Amana Dishwasher - Instructions

Remove all screws on inside panel disconnect wires remove switch

After truning off the power, I removed the inside door panel by unscrewing the 11 screws. Next unplugged the latch assembly from the two electrical connections. Connected the two electrical connection to the new part and reinstalled the inside door panel. The only difficulty was that the first part I ordered did not have a handle as part of the assembly.

Before starting the job, I looked at the information provided from others who had the same problem and had successfully installed the new part. The information provided was the reason I chose your company to purchase the part. THANK YOU!
1. Turned off power
2. Removed screws holding inside of door.
3. Disconnected and removed old part.
4. Removed dishwasher door handle and attached to new part.
5. Connected new part and positioned it in the handle insert. (Be sure the small bars holding it together are firmly in place.)
6. Reattached the door.
Here is the problem: I did not realize I also needed a new door handle as I assumed it would be attached to the new door latch assembly. My door handle is cracked and some of the plastic has broken away. I will now have to order the new handle and pay the cost of shipping that would have certainly been less if I had ordered it in the first place.

Ordered the latch part Friday A.M., Saturday afternoon it arrived. My wife repaired it while I supervised. (She doesn't have a tool belt yet). It took longer to pry off the 2 switch connectors than it took to remove and replace all the screws. They were on there pretty good, so we used extra care. Now she's my "Handygirl". Works great. The price was lower than I could find locally too. Thanks for great service.

The only challenge was identifying the correct model as I made the order. Your search of parts database made it easy and was able to order the correct part.

I just put the new one in. It fit perfectly. It's a better quality part than the original. I'm very happy.

Internal door panel must be completely removed taking care to uncouple all electrical connectiones as you go. Some connections can be very stubborn so take care and be sure to cut all power to the appliance before starting. Replacing the handle and latch from this point is very easy.

Hey I hope this helps someone. . I was quite frustrated with out little dishwasher. It almost seemed that the dishes would come out dirtier than when they went in. Turns out we have hard water and it did a number on the parts of the dishwasher. Luckily, the parts were cheap enough that I thought I would give em a try. Between that and something called "dishwasher magic" I had success! One thing I wished I did differently was that I should have purchased two (2) wash arm retainer clips. . . I re-used an old one but it would have been nice to have all new parts inside. Needless to say, our dishes now are super clean. I have 6 young kids so our dishwasher gets a real workout. I may have to purchase a water softener down the road but for now we'll roll the dice. Hope this helps!

unsnapped the broken piece from the under side of the top rack; assembled new washer arm and snapped back in place under the top rack.

Take rack out of box, put in dishwasher. Easy
Part arrived on time, would use this website again.

I replaced a tempermental Maytag with a new Electrolux dishwasher. The new dishwasher didn't include any decent trim strips so I ordered the two maytag strips like my old unit had. Looks great. Easy to install. FAST shipping!

I did not receive any instructions -- removed the screws from the unit - along the side - the big discovery was removing the black lining and finding additional screws to loosen. These are probably the only ones I needed to remove.Raised the feet on the dishwasher and then placed the new brackets. Re tightened the screws and I was the hero with my wife.Thanks Gene

First the left hinge came, then two weeks later the right hinge came. Went fix it and have lost the left hinge ... still bent Oh dear! - Had better results with my matching Maytag Stove. Dropped heavy object on glass top and broke it. Ordered a new one and came in one day from PartsSelect.com. Installed imediately and wife is very happy. Thanks for the fast service!

Removed the rack and disconnected the rotary washer thing and and stemware holder and reconnected all to the new part in the reverse order.

I first ran a cycle of clear glass to verify that there was something wrong. I pulled an exploded parts diagram off the internet to see what parts there were and to give me an idea how everything came apart. I slowly took piece by piece< keeping all screws seperated with the part they belonged with. I set the parts in the order they came out so I knew what way they would have to be returned to the machine. I cleaned and inspected all parts to ensure they were in working order. When I removed the accumulator filter I noticed all the screens were caked with what appeared to be soap scum. I then noticed one of the screens was tore away from the filters body about a half inch long. I decided to order the part(which was a sunday). The part was on my door step by tuesday morning( with standard shipping). I had the part reinstalled in 10 minutes. The hardest part of the whole job was getting all the slats on the filter to line up with the ones on the cover to be screwed onto it. They need to be lined up or the screws will not go in properly, which would be a whole different bag of worms. The job was seriously simple and the ease of ordering and receiving the part made it that much better. Thank you for being a great service to the service industry.