ADB2200AWB Amana Dishwasher - Instructions

I first took of the inside door panel approx 9 screws. The latch assy was the top of the door panel that I took off. Took the wires off both side of the assy and attached them to the new assy. I re-attached the inside door panel. it was a very easy fix. No other dealers in the area had the part. I order the part from parts select and was back in action within three days.

opened the door and put it in

Very easy to find and order the part I needed. The hardest part was opening the box when it was delivered. Very good service and great site to find replacement parts.
Richard Mulligan

I ordered the part, unscrewed the door, installed the new handle, and put it all back together again.

Ordered a new one and replaced the old one.
"WHEW"
Only took 2 Old-Fashions to perform the task!!!

Happy Holidays---Geno

Pushed them on

removed all the torx screws that hold the inside panel to the door. Removed the latch/switch.[Don't forget to turn off the power] Could not remove the wiring harness from the micro switch so I removed the old micro switches from the old switch and moved them to the new switch, harness and all. repositioned the latch and reattached the panel.
there are two latches available. I ordered the wrong one at first. Got the correct one in just two days. Was able to return to wrong one for credit.
Great service. Glad I didn't call a repairman.

I had to push at the old latch with a screw driver to get the door opened and then removed about 14 screws and opened the back of the door, removed the two wires from broken latch. Replaced the wires to new latch, set in place and replaced the 14 screws closed the door and was is good as new.
Easy as pie.

first i opened the door. then i proceeded to pull the lower dishrack out of the dishwasher. I then placed the new silverware basket into the center position for the basket. After replacing the basket i pushed the rack back into the machine and closed the door.

the removal of panel was simple, the removal of electrical connections was difficult even with a little wd 40 i was nervous when any metal part is attached to a plastic part. it didn't want to let go but my suggestion is to work the connecter back and forth forward and back to get it started then with a firm grip on the wire harness with pliers pull the two apart with pliers. good luck!!!

Disconnect power first. Removed all the screws on the inside of the door, pulled the inside part of the door away from the front part to gain access to the latch, disconnecting the wires was the most difficult part since the connectors didn't want to slide off the metal tabs very easily, replaced the latch and put everything back together. When I ordered the part, I wasn't sure if it was going to be just the handle, but I was glad it was the entire latch assembly.

I ordered the part for a 15+ year old Maytag dishwasher. It came in just a few days with normal shipping. I put in the new part and tossed the old one. I was shocked that I could get the exact replacement part in such a short time.

Thank you PartSelect!

The repair was so easy. I just unscrewed the inner door panel , unplugged the old latch, attached the new and put the panel back. Thanks to all the other comments which gave me the confidence to attempt this repair. The hardest part was disconneting the old electric connections but with a little bit of "coaching" they came off OK. Thanks again.

Great website, great selection, easy to order correctly. The basket fits perfectly and my dishwasher suddenly is like a brand new one.

Thank you very much! M. D. Grey, Richmond, Va

Removed the screws that attach the inside of the door, keeping them in order. Two are longer. The part is loose at that point and the wires un clip with a little pull with a needle nose. Replaced with the new part, re screwed and good as new. oh and turned off the breaker before disassembly.