Models > ADB1200AWS > Instructions

ADB1200AWS Amana Dishwasher - Instructions

All installation instructions for ADB1200AWS parts

These instructions have been submitted by other PartSelect customers and can help guide you through the dishwasher repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the ADB1200AWS
481-495 of 511
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Door would not close

  • Customer: Micheal from Batavia IL
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Wrench set
  • 0 of 0 people found this instruction helpful
Removed the panels and the part came right out. Easier than I thought. part came faster then expected.

Silverware basket was deteriorating.

  • Customer: Mary from Houston TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Couldn't have been easier! All I did was remove the old basket and install the new one.

dishwasher door not closing correctly and bad microswitch

  • Customer: Wesley from Glendale AZ
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Unscrewed 10 torx fasteners.Pulled inner door panel up to gain access to latch. Latch has both micro switches attached. Un plug switches, remove and replace door latch, button up and your done.

Door latch handle failed

  • Customer: Roberto from Cedar Falls IA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Install complete latch and handle assembly. Remove panel, disconnect wiring and install the assembly

Dishes were not getting clean

  • Customer: Michael from Buttw MT
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
Thank You PartSelect for making this repair project simple and stress free. The exploded diagram of the appliance was clear and consise. The parts list was very helpfull. Showing me which parts were the most replaced gave me the confidence to order, reducing the prospect of having to return items ( always a pain point ). Parts arrived in just a few days. Followed the instructions on the video. Dishwasher was back in operation in no time and passed an overly thourgh dish inspection. Your site is amazing and is on my favorites tool bar. Thanks Agian !!!

water leak at right front coner

  • Customer: NORMAN from BRYAN TX
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Socket set
  • 0 of 0 people found this instruction helpful
pulled dishwasher out to see where the leak was comming from . after seeing where it was leaking i searched for parts for jenn-air diahwasher. that when i read about the reviews on how to replace the float switch. it was very helpfull in being able to do the work myself and not having to pay a repairman.

Broken dishwasher basket.

  • Customer: John from Darien CT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Threw out the old broken one and this fit perfectly!

I got my parts from you

  • Customer: Angela from Whitehall WI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I haven't gotten to our rental to get the job done yet but it should go real easy because the broken one came off real easy these should go on just as easy. Thanks again for the parts

The bottom grid of the silverware basket separated.

  • Customer: Irene from Holmdel NJ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Just ordered a new one, which came VERY quickly, and put it in!

The dishwasher door was fitted with a plastic striker. It obviously wasn't meant to last, and eventually broke. This meant that the door would not shut properly, so I couldn't use the dishwasher.

  • Customer: Judi from Katy TX
  • Difficulty: Really easy
  • Time to Complete: More than 2 hours
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I pulled out the dishwasher a little to expose the screw on the striker, (located on top of the dishwasher. The annoying thing was, it wasn't a regular screw, so unfortunately I had to go out and buy a torx screwdriver (which cost more than the new striker). It would have been so much quicker, and cost effective, if it had been a normal screw. Anyway, I completed the job and pushed the dishwasher back into place.

Broken latch

  • Customer: John from Richfield MN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
This was fantasticlly easy. Less than 2 minutes to remove the screws. Made a mark on each of the two wire assemblies to ensure proper replacement. Pulled off the wires. Connected the wires to the new assembly. Placed it into the opening and re-tightened all the screws. Probably five minutes! Works better than new. THANK YOU!

leaking water

  • Customer: Edgar from Round Lake IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Pliers
  • 0 of 0 people found this instruction helpful
I removed the leaking valve and installed the new one it was pretty easy

Leaking under right front by float switch

  • Customer: James from Three Rivers MI
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Unplugged the power cord and removed front toe kick panels. Used a small mirror to see the location of the screw holding the float switch in place and removed the screw, disconnected the float from inside the dishwasher removed the float switch and replaced. It was a simple repair and so far seems to have solved the leaking problem. There was some unusual wear to my old float and the switch looked like it may have been leaking a small amount as it had lime build up on the switch lever. The part came with an easy to follow instruction sheet. PartSelect has saved me money on repair work I thought I would not be able to do myself. The website is very helpful in resolving what he problem may be and what parts are needed. Fixed four other appliances using this site over the past few years and they ship quick.

latch broke

  • Customer: mike from highlands ranch CO
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
easy, took 20 minutes to unscrew panel (after unplugging electricity), remove 2 electrical connections, put in new latch, reconnect 2 electrical connections & screw back on - saved $80 in having someone come out to service.

Dishes weren't getting cleaned fully

  • Customer: William from Bel Air MD
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
Checked to see if the disposer was stuck or sprayers filled with food. They were clean so I listened and checked to see if the sprayers were spraying while the dishwasher was running. It was not. Checked online for answers and they said that there might not be enough water in the dishwasher since it did not fill appropriately. I added water during the cycle and then the sprayers were working properly until it drained and filled again. Installed the new water inlet valve and all works properly now.
All Instructions for the ADB1200AWS
481-495 of 511