ADB1200AWQ Amana Dishwasher - Instructions

PartSelect.com was a life saver!! We have a 5+ year old dishwasher and it was slammed shut too hard and the latch/handle assembly broke. I was worried sick that I wasn't going to be able to find a replacement for such an old washer and that I was going to have to buy a new one. PartSelect made it easy to find the exact assembly I needed and it was here in a couple days!! Great website and service!!

1. Open the dishwasher door. Remove the inside panel of the dishwasher door and expose the Handle and Latch assembly.
2. Order "Handle & Latch Assembly Complete with Switches" from partselect.com
3. Received the part 3 days later.
4. Replace the part.
5. Done.

Removed the 12 screws on the backside of the door. Raised the inner door up, took the handle assembly out, removed the switch wires then reversed the process to reinstall.
No problems, worked good

Removed about ten screws which secured the inner liner in door. Two of those screws also were designed for double duty as they also held the handle assembly in place. The handle has two electrical connectors to remove. Reconnect the assembly and reassemble inner liner screws. The fix was easy. New handle assembly has a steel pivot pin instead of plastic so replacement part/assembly addresses the failure mode.

Removed inner panel on the door, went online and determined the part I needed and ordered the part on Thursday evening, part was shipped on Friday, received the part and installed on Saturday. Very pleased.

remove all the screws along inside of the door. seperate the inner and outer door. remove the electric terminals. pull out old door latch. put electric terminals on new part. reattached. replace inner door and screw back down.

First - I selected 2-3 day delivery after ordering the part late afternoon. The part arrived the next day. Very satisfied with the time it took and the ease in selecting the correct part. Once I got the dishwasher door open, I removed the 11 screws from the door panel. The top two screws also hold the latch asssembly in place, so I removed those last. Then I detached the wiring, which required a pair of plyers - they were very tight. After that, I was able to replace the new part, screw the panel back on, and load the dishwasher for my wife before she got off the phone with my mother-in-law. Brownie points were awarded, and it took about 15 minutes.

This was the easiest repair I have ever done! Ordered in a few mins, and received the very next day. Opened the box and installed the two wheels - Done. That was Easy! Thank you so much for such quick service! Most definitely will use your company again in the future.

Took out the old, put in the new. Thank you.

Took the old one out, put the new one in it's place

1. Turned off power. 2. Unscrewed ten screws holding inside of door in place. 3. Lifted cover enough to access latch - helpful to have someone to hold this while doing the job. 4. Disconnected old latch assembly on each side - this was the hardest part as they were stiff and needed to be pulled hard. 5. Attached new latch assembly. 6. Screwed door panel back on. 7. Switched power back on. So easy and saved about $150. This stuff is NOT HARD and I just wish more people had the gumption to do repairs themselves instead of paying 'experts' to do exactly the same job.

Took old one out & put new one in. Color is a little darker than the old one but the forks & spoons don't know the difference. Great price and was here in 3 days from order.

After checking the door switch I found the micro switches were working but the unit would not start on the control panel. Thinking the latch was worn, I ordered a replacement. After changing the replacement latch and switches that came with it, the unit would still not start. I checked the switch and it is making contact. I can start the unit after I close the door using the handle of a pair of pliers. So I assume the control board is bad, due to the fact that it will not initialize the control panel until the door is closed. Now I have ordered a control board and will replace...stay tuned!!

Ordered door latch assembly tuned off breaker pried door open as it was closed.. took 10 screws out of door ,unplugged 2 plugs popped nrw part in put screws back...fixed easy job...took about 10 minutes saved at least $100 dollars part was delivered in 2 days. The hardest part was getting the door open to fix it.

Replaced silverware basket