ADB1200AWB Amana Dishwasher - Instructions

Pried door open. First ordered the wrong part...latch assembly with no handle. Reordered proper part and installed it in no time. Ordered regular shipping (cheapest) and in both instances parts were there in two days via Fed Ex. Very quick getting the parts to me.
Removed half of the screws on inside of door and used pliers to unhook assembly from the two power connectors and then popped new one in place by hand. All repairs should be this easy. I will use this company again for all appliance parts needed.

Went to partselect.com and located a replacement silverware basket. Was easy to locate and the order process was easy. The new silverware basket arrived within the week, did not use any special delivery options. Great experience!

removed the old basket, pulled off the handle and put it on the new basket. It was quick and easy!

removed top row of screws and two down each side. unplug electrical connectors. reverse operation. the amazing thing was i ordered the part on-line wed. , the day before thanksgiving, and it was here via fedex on friday, two days later. funny how some repair services tell you the parts are out a week to ten days!

I just took out old basket and removed the old handle with a screw drive. Then I snapped the old handle on the new basket and placed it into the dish washer rack. All done!!

No repair, just replacement. The basket did not come with the handle, so I pulled the one off of the old one and broke a tab in the process. It would have been easier if the handle was shipped with the basket.

I had to use 2 screwdrivers to unsnap the handle off the old basket to put on the new basket. That was it. Easy.

The latch that opens the door to the diswasher was broken. It became difficult to open the dishwasher door.

A quick search on the internet using the machine make and model took me to Partselect.com. Another quick seach of the exploded views of my dishwasher gave me the part number and a few more clicks had it on order.

I recieved the part buy the end of the week. and had it installed within 15 to 20 minutes and I was up and running.

What a deal!!! Thanks

It's not much of a story. Just discarded the split basket and replaced it with the new one. I was really impressed with the short amount of time before it arrived

I installed additional wheels that had broken off. This was on my elderly mother's dishwasher in Iowa. I was visiting from California for a week when I discovered it was broken. I worried about getting the parts because I was not familiar with the area. PartSelect saved me by getting the parts delivered before I flew back to California. It was really great. Thanks,

Before starting the job, I looked at the information provided from others who had the same problem and had successfully installed the new part. The information provided was the reason I chose your company to purchase the part. THANK YOU!
1. Turned off power
2. Removed screws holding inside of door.
3. Disconnected and removed old part.
4. Removed dishwasher door handle and attached to new part.
5. Connected new part and positioned it in the handle insert. (Be sure the small bars holding it together are firmly in place.)
6. Reattached the door.
Here is the problem: I did not realize I also needed a new door handle as I assumed it would be attached to the new door latch assembly. My door handle is cracked and some of the plastic has broken away. I will now have to order the new handle and pay the cost of shipping that would have certainly been less if I had ordered it in the first place.

After truning off the power, I removed the inside door panel by unscrewing the 11 screws. Next unplugged the latch assembly from the two electrical connections. Connected the two electrical connection to the new part and reinstalled the inside door panel. The only difficulty was that the first part I ordered did not have a handle as part of the assembly.

i deinstalled everything in the ground of washer so that i saw the e motor
take of the part from the motor and install your new part
and reinstalled everything

Remove all screws on inside panel disconnect wires remove switch

Added toe panel and insulating strip.