A710 Maytag Washer - Parts
Keep searches simple, eg. "belt" or "pump".
Syphon Break Elbow Kit with Clamp
PartSelect #: PS2017573
Manufacturer #: 208847
For drain hose 7/8".
$26.53
In Stock
Adjustable Leveling Leg
PartSelect #: PS2021026
Manufacturer #: 22003428
If your washer shakes or vibrates loudly when it reaches its max speed, make sure the 4 levelling legs are even. Adjust the legs so that the machine is level, and tighten the locking nuts on the legs ...
$18.47
In Stock
Spring Retaining Clip
PartSelect #: PS11739294
Manufacturer #: WP22001650
This spring retaining clip is just under 1 inch long. The clip is made entirely of metal and is attached to the back wall of the washer, under the console. If your washer is vibrating and louder than ...
$11.10
In Stock
Siphon Break Connector Kit
PartSelect #: PS2017342
Manufacturer #: 206638
This plastic siphon break comes with a metallic clamp and gasket. It is used with many washing machines.
$73.04
In Stock
Outer Tub to Pump Hose
PartSelect #: PS11738880
Manufacturer #: WP213045
This hose connects the outer tub to the pump of your washing machine. It is twelve inches long and all black in color. This hose is made entirely of rubber.
$42.82
In Stock
Hose Clamp
PartSelect #: PS11740613
Manufacturer #: WP285655
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installat...
$11.10
In Stock
Damper Pad Kit
PartSelect #: PS2017036
Manufacturer #: 203956
This damper pad kit is used for base support. It comes with three six inch damper pads, two little tubes of lubricant. NOTE: This part will need adhesive to stick it in place.
$45.24
In Stock
Washer Lid Bumper
PartSelect #: PS11738875
Manufacturer #: WP212716
This washing machine lid bumper is just under an inch long. It is all gray in color and is made entirely of rubber.
$7.70
In Stock
Glide and Spring Kit
PartSelect #: PS2017149
Manufacturer #: 205000
This glide and spring kit contains two three inch springs, four one inch square glides, and two tubes springs. This kit replaces older style round roller glides.
$57.98
In Stock
Screen
PartSelect #: PS11746894
Manufacturer #: WP96160
Found on the water inlet valve.
$13.61
In Stock
Injector Sleeve Bracket - Side Mounting
PartSelect #: PS11739774
Manufacturer #: WP22213057
This injector sleeve bracket is white and made entirely of plastic. This is a side mounting style bracket.
$11.10
In Stock