A3531WRW Admiral Range - Instructions

First my husband turned off the breaker to the oven.
Secondly took the racks out of the oven. Then he re-
moved the two screws that hold the element in place.
He pulled the element out about 3 inches and used
the pliers to disconnect the old element. He plugged
the new element into the wires and checked to make
sure they were snug. Then he put the screws back
in, turned the breaker back on, and turned the oven
on. Presto! The oven is back in business!

After watching the instruction video on your website, it was a piece of cake. Turned off circuit breaker, removed the old element that was in 2 pieces because of a fire, and installed the new element. Couldn't be easier. Saved a bundle of money.

My mother-in-law called with here oven not working. I went over and got the model number off the stove. Came home and went on the internet and typed in the number on a Google search and came up with your site. It took me to the diagrams of the specific oven and showed me all the parts. When I had selected the part the site also showed me a video of how to replace the part. This gave me confidence to order the part and do the repair myself. First turn off the power at the breaker. Two screws, two clips removed. A little time in cleaning up the dust from a burned out element, then two clip reattached and two screws to secure the element and a test to see that it heats and I was done. Everything went as planned. My Mother-in-law thinks I am wonderful. Thank You Part Select...

I unplugged the stove. Took out the burner and removed receptacle by pulling it out of the bracket and clipping the wires. One thing you want to make sure is that when you clip the wires from the receptacle you're replacing you leave enough wire so that you can connect them to the wires on the new receptacle when it is in place on the stove. I had just enough but would have liked more. The bracket I received didn't match the one on the stove so I used the one on the stove since the receptacle itself was the same as the one I was replacing.

I just installed the new burners into the proper place and they fit This was very easy to order. Just had to find the model number which the web site told me where to find this. I am very satisfied with the service Thank You

Pulled stove well away from wall - took plug out of socket..Phillips screwdriver. Slotted element into wire thing-y - one connector fell down the back, so had to take back off the stove. Used tweezers to pull wire back into back of oven. Screwed plate over wire.Was thrilled when I turned stove on and element shone brightly. Husband away so had to do it myself. Had a glass of wine.

It was so easy. The video that was sent to me with my order confirmation made it kids play. Took away any of the fear of doing something wrong. Highly recomend using parts select. Fast servic too!

Shut off power at breaker box. Removed top burner unit. Removed old receptacle (Mounting screw was rusty so I drilld out the old one.) Cut wires from old unit. Stripped wires back on old unit. Attached old and new wire with ceramic wire nut. Attached new unit. Reinserted top unit. Reconnected power and "voila". Wife was smiling again.

Bowls needed to be replaced.

screwdriver

I removed the old one and put in the new one. Works great!!!!!!!!!!!!

Unplug Oven. Undid two screws pullout, undid two wires. Plug in two wires, put unit back, put back tow screws. Close oven door, replug oven, turn on oven for test. It worked no fire.

Removed two screws, pulled out the old element, disconnected the wires from it. Connected the wires to the new element and installed it in with the two screws.

10 Minutes for a stove my landlord thought was not fixable (repairman had already cut the wires to the element and capped them)! The delivery person handed me the package, I got out the single tool needed, installed the part, put away the tool, cleaned my hands, and put a pot of water on the stove to boil for pasta. 10 minutes!

It only took a manner of a few minutes to replace the heating coil in the oven.