Quick Question!

Have you ever purchased from PartSelect.com before?

Models > A308S > Parts

A308S Maytag Washer - Parts

All parts for the Maytag Washer A308S

Below is a list of all parts for the Maytag Washer A308S - Residential. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the A308S
1-14 of 244
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$23.66

Water Inlet Valve

This part has two ports for water to enter. It is blue and is intended for use with many washing machines and comes with a multi-mount bracket and an outlet adaptor.

$50.48

Mounting Stem/Tub Seal Kit

This kit comes with hub assembly, agitator seal and spanner nut. If your washer leaks once full (with or without clothes in it) or leaks during agitation, then you should replace the seal.

$10.08

Adjustable Levelling Leg

Sold Individually. This adjustable leveling leg comes with a stop nut.

$48.36

Tub Bearing Kit

This kit is used on 2-belt washers. It is recommended to change the seal kit at the same time.

$21.71

Damper Pad Kit

This damper pad kit is used for base support. It comes with three six inch damper pads, two little tubes of lubricant. NOTE: This part will need adhesive to stick it in place.

$23.74

Glide and Spring Kit

This glide and spring kit contains two three inch springs, four one inch square glides, and two tubes springs. This kit replaces older style round roller glides.

$5.15

Tension Springs -Set of 2

This is a set of 2 tension springs.

$125.64

Drive Motor - One Speed - 120V

$37.80

Water Injector Hose

This water injector hose is the hose found at the top of the tub cover of some clothes washers.

$24.77

Inlet Hose Kit

This hose is almost 5 feet long and now comes with the washers for proper installation. It is used to bring water into your washer for the cycles.

$4.94

SCREW

$25.20

Lid Plunger & Bracket Kit

This kit is part of the lid switch mechanism and will stop the spin cycle if the load is unbalanced. When you lift the lid, it resets the plunger and your cycle will resume.

$56.34

Upper Outer Tub Cover Clamp Kit

This clamp does include the nuts and bolts to hold it together but it does not include the rubber seal. Sold separately.

$10.25

Screw & Fastener Kit - Front Panel

All Parts for the A308S
1-14 of 244