Models > 961140004

961140004 Lawn Mower - Overview

Models starting with 961140004

Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Cable – Part Number: 532183281
Cable
★★★★★
★★★★★
(4)
PartSelect #: PS9014267
Manufacturer #: 532183281
Made of a durable metal with a plastic cover, this cable is used to control the on/off function of the engine on various lawn mowers. It is not part of a kit or assembly, it is black, and it is sold i...
$13.69
  In Stock
Blade, 22" – Part Number: 532406713
Blade, 22"
PartSelect #: PS9017810
Manufacturer #: 532406713
This blade is sourced directly from the manufacturer for use in Craftsman and Husqvarna lawn mowers. The blade is the part of the mower that is responsible for cutting and mulching the grass. It is 22...
$15.90
  In Stock
Bolt, Handle – Part Number: 532191574
Bolt, Handle
★★★★★
★★★★★
(1)
PartSelect #: PS9014802
Manufacturer #: 532191574
This Handle Bolt is sourced directly from the original equipment manufacturer for use in various lawn and garden equipment. It is used to secure the upper and lower handles together and is tightened b...
$3.99
  In Stock
Rear Skirt – Part Number: 532413160
Rear Skirt
★★★★★
★★★★★
(1)
PartSelect #: PS9287254
Manufacturer #: 532413160
$13.69
  In Stock
Engine Zone Control Cable – Part Number: 582991501
Engine Zone Control Cable
★★★★★
★★★★★
(2)
PartSelect #: PS9982488
Manufacturer #: 582991501
$13.69
  In Stock
Control Bar – Part Number: 532194177
Control Bar
★★★★★
★★★★★
(1)
PartSelect #: PS9973354
Manufacturer #: 532194177
  No Longer Available
Handle Knob – Part Number: 532185577
Handle Knob
PartSelect #: PS9020379
Manufacturer #: 532185577
$3.99
  In Stock
Wheel – Part Number: 585911001
Wheel
PartSelect #: PS11824808
Manufacturer #: 585911001
$27.40
  In Stock
Nut Lock 5/16-18 – Part Number: 873800500
Nut Lock 5/16-18
PartSelect #: PS9160134
Manufacturer #: 873800500
Nut lock 5/16-18 (5/1 Lock nut) is a 5/1-18 inch silver metal nut. It can be installed using a wrench or socket to secure parts in pace, and to lock down to prevent backing out due to vibration. If da...
  No Longer Available
Nut, Hex, Flangelock – Part Number: 532409149
Nut, Hex, Flangelock
PartSelect #: PS9022497
Manufacturer #: 532409149
Made of high-quality metal, this hex flange locknut is designed for use with various lawn mowers and ride-on mower/tractor models and is sold individually. This locknut attaches to the end of the carr...
$4.99
  In Stock
Mulcher Plate – Part Number: 532160830
Mulcher Plate
PartSelect #: PS9972782
Manufacturer #: 532160830
  No Longer Available
Hardened Washer – Part Number: 532851074
Hardened Washer
PartSelect #: PS9019116
Manufacturer #: 532851074
This washer is not part of a kit or assembly. It is sold individually. With an O.D. of 1 inch, this OEM replacement part is made of dark grey metal and is used to provide a tight seal between the mowe...
$4.99
  In Stock
View More
Back to Top

Common Symptoms of models starting with 961140004

[Viewing 1 of 1]
Mower blade does not cut
Fixed by
these parts
Fixing
Show All
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Clogged muffler
Remove the 4 screws holding the rear motor casing. Then you can take the easy route and drill through the front motor housing with a 3/8 to 1/2 bit in order to access the front muffler screw. If you want to work harder you must remove the motor from the shaft, remove the clutch assembly (this requires a long 15t torx bit, removing the spark plug to stuff the piston with rope or rag to seize up the piston, and then removing the front motor casing to access the front muffler screw). Once you access both muffler screws remove them with the t20 torx driver. Install the new muffler with the small gasket inside the housing, and the larger gasket/heat shield between the muffler and the motor.
Read less
Parts Used:
Assembly-Muffler/Shield
  • Rosanne from BRIDGEWATER, VA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken cable that s needed to start start the mower
i just took off the old one and the new one just fit right on.
Parts Used:
Cable
  • Ralph from LIGONIER, PA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I had to buy Troy-Bilt parts to adjust for a Murray Lawn Mower
Grind off 1/4" of each end of the 22" blade to fit 21' Mower.
Make Bend adjustments for the Handle to fit.
Parts Used:
Control Bar Blade, 22"
  • Charles from Memphis, TN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top