Models > 96043021800 > Instructions

96043021800 Husqvarna Lawn Tractor - Instructions

All Instructions for the 96043021800
1 - 6 of 6
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Wheel bushings were bad
Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat other side.
Parts Used:
Ring Klip Number T5304-75 Cap Axle Black 1 50 x 1 00
  • Anthony from OLIVEHILL, TN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
12 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Take the wheel off. Place the key in the slot. Put the wheel back on.
Just described it.
Parts Used:
Key
  • Gary from PILESGROVE, NJ
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
4 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Console assembly broke
Underneath the console is a 10 mm nut took it off slip the grip off and installed new console took less than 5 min very easy repair
Parts Used:
Console Asm. Deck Lift
  • Tamara from Iuka, MS
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Original shield was damaged
Removed original shield ( 2 bolts), replaced with new shield.
Parts Used:
Shield
  • Wayne from LAKEVILLE, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Wrench set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer runs no heat
Disassemble dryer. Replaced element assembly. Re assembled dryer. Unit runs and heats.
Parts Used:
Solenoid Switch-Ign
  • Russell from MACON, GA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front wheels, too much end play
Shimmed the wheels out on axle.. No more slop.
Parts Used:
Washer 25/32 x 1-1/4 x 16 Ga.
  • Frederick from BINGHAMTON, NY
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
7 of 28 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 96043021800
1 - 6 of 6
Back to Top