91194401301 Kenmore Range - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Bake element was fried and cracked
1. Unplug stove - Important step 2. Remove hexhead screws holding element in place. 3. Disconnect wires. 4. Get new part. 5. plug wires on new element. 6. attach element with hexhead screws in place. 7. Plug in stove. Test the burners, clock and oven to see that they are all working. Mine were not and then I remembered that I started at step 2 instead of 1 and shot sparks everywhere and tripped the breaker. So went and reset the breaker and everything worked fine. Remember always to do Step 1.
Parts Used:
-
Charles from Burien, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
Was this instruction helpful to you?
Thank you for voting!
bake element buned out sparking
actually my 56 year old daughter did it for me after watching an instruction video on you tube. I'm 82 and can't bend down to reach into back of oven. however, am having much trouble getting the door on again.
Parts Used:
-
Hannah from Fort Collins, CO
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
Was this instruction helpful to you?
Thank you for voting!
Burner not heating
Removed old socket, I had replaced with a aftermarket that really did not work well. When I recieved the terminal block kit from your company it was the proper kit. Service was better than expected, part and price was great and it took very little time ti install. Thank you.
Parts Used:
-
Henry from Norwich, CT
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Element broke in half and caught on fire
My son followed the easy, how-to directions on your web site, and had my oven ready for me to use in about 15 minutes!
Parts Used:
-
Bobbi from Milford, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Heating element went bad
I would recommend you guys anytime . Easy to find part need , fast and the right one.A+++++
Parts Used:
-
Stephen from wallkill, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
old element started sparking and caught on fire
Unpluged power from oven.Removed two screws at base of element.Gently pulled out element to expose 2 wires.removed wires from base of element,careful not to let wires go back into oven wall, and removed old element.Connected wires to new element pushed back into wall of oven and tightend 2 screws. plugged in oven.done
Parts Used:
-
john from leander, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
no problem, needed to replace the racks
took the old ones out & put the new ones in. Piece of cake!!Thanks for the prompt delivery!!
Parts Used:
-
Joanne from Parrish, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!