91193311010 Kenmore Range - Instructions

Just had to change out the drip bowls, easy. But, I wanted to comment on the quick delivery on the new bowls. I was impressed. Thank you.

Took the old pans out and put the new ones in. Simple as pie

Bake element broke into pieces. Replaced with new element. Removed screws, detached wires (which were hard to control due to work area and size of wires falling into oven space) but attached to new element, screwed tightly and oven worked beautifully.

I removed the two bolts holding element in place. I carefully pulled element out when I lost the right wire. Now panic sets in. I remembered reading other's problems, I got a pair of curved needle nosed pliers and luckily grabbed the wire. Then it was easy, push wires on element and push in and replace two bolts tightly. Exchange glances with my wife, turn oven on, and it works. Wife makes apple pie. Life is good. .

Just plugged the leads in and screwed in two retainer screws. Done in 5 minutes. The part even came the very next day after I ordered! Parts select is the s*$t! I will be ordering again when I need appliance parts! And the part was $30 cheaper than it was from the manufacturer! I love PartsSelect.com

Actually, a friend did the repair for me. I don't know what tools he used, but he said it took about 10 minutes from the time he opened the box. As another customer pointed out though, if the wires disappear when you remove the old element, which often seems to be the case, you will have to go in through the back of the oven to do the repair. Don't panic if this happens. It is still an easy fix. You will just have to pull out your stove. Look at it as a chance to clean behind and underneath. You might be surprised at the things you may find there, LOL!

Difficulty was in determining the right model number and part number of a switch. Noted that the left front burner came on when the switch for the left back burner was turned on. By inspection I found the left front burner switch had become faulty by actually hearing an electric arc in the switch and smelling the oder in the switch. With help from the person I called I was able to determine that the Model Number on the actual stove was wrong. It had an extra 0 between the W and F which she said was a common error in the GE model number. I then gave the switch number I found on the switch to the contact person and she was able to verify the right part number. It was relatively easy to replace the switch by taking off the back upper plate then taking off two screws that held the switch to the stove. The part came quite quickly once ordered. Sears repair wanted $75 just to diagnose then the cost of the part. I got the switch for $69.

This website made it so easy for me to find the part I needed! Shipped promptly with no problems or delays and the rack fit perfectly in my oven.

Removed two screws inside the oven door using hex key. Then I gained access to 4 screws that allowed me to remove the oven door handle assembly. I place the oven door glass in the tracks and replaced the handle assemby and reinstalled the two hex screws.

Disconnected power supply- pulled stove out from wall- removed the back panel (6 screws)-removed the wires from the push terminals of the bake element- removed the bake element (2 screws) from the front inside the oven-replaced the new element by reversing the above steps. DONE!

Dear PARTSELECT

My experience with you was spectacular!!!!

The oven broiler burner went out on a Sunday afternoon while my wife was using it to cook for our family dinner. We ordered it that day and it was received, installed, and working on Tuesday afternoon...



How could it be any better?



Thanks



George Crady

I removed the door from the oven. Then unscrewed all of the screws that hold the outerdoor to the inner. Some posts indicated this would not be necessary but on my model it was. Next, I unscrewed the brackets holding the inner glass to the door & removed the glass, noting the way the original glass was positioned and facing. I installed the replacement glass. The metal frame is stamped with "oven" and an arrow idicating the direction the glass should be facing. Once in, I placed the fiberglass rope back around the glass frame and screwed the inner and outer door back together. Finally, I placed the door back onto the oven. Tools used - cordless drill, star bit, phillips head bit.

Due to my disability, 2 neighbors came over with their tools. It took both of them to take oven door apart to install the new glass. All went well.

So ordered my racks and used them right away--nothing to it--it is oven racks! But your service was so prompt and description thorough enough to figure it all out and get it ordered.thanks

Watched video,and used it as guideline.Biggest problem was removing tape from old wires.