Below is a list of all parts for the Maytag Dryer 7MMGD6630TQ1 - Residential. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.
This dryer drum belt has four ridges, three grooves and is 1/4" wide.
Cycling thermostats continually cycle the heating element off and on to maintain a constant inner temperature. This particular cycling thermostat has a limit of 155 degrees Fahrenheit and a differential of 25 degrees. Meaning that with this thermostat, the heating element will cut out at 155 degrees and cycle back on once the internal temperature drops by 25 degrees.
A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.
This gas dryer ignition coil set comes with two ignition coils: one three terminal Boost/Hold coil, and one two terminal secondary coil. Usually only one of them burns out but you should replace them as a set. Both have to be operational for the gas valve to open.
This silicone carbide igniter with ceramic holder kit includes the 3" flat igniter, bracket, 5" wire leads, and the plug. Able to replace both round and flat igniters, this kit is ...
This filter collects lint as it passes through the dryer vent.
Note: This part has been updated by the manufacturer. It may appear different but will still function the same as the...
This part senses the flame for heat allowing the gas valve to open.
This motor fits most Whirlpool incorporated dryer brands before 1996. NOTE: Pulley is NOT available separately.
This kit comes in two pieces: the catch and the clip.
This part starts the drying or washing operation.
The blower wheel is a squirrel cage type wheel whose purpose is to move the air through the room or appliance.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2015 , Eldis Group Partnership. All rights reserved.