Models > 7MMGD6630TM0 > Parts

7MMGD6630TM0 Maytag Dryer - Parts

All parts for the Maytag Dryer 7MMGD6630TM0

Below is a list of all parts for the Maytag Dryer 7MMGD6630TM0 - Residential. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the 7MMGD6630TM0
1-14 of 140
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Multi Rib Belt - 92-1/4"

This dryer drum belt has four ridges, three grooves and is 1/4" wide.


Cycling Thermostat

Cycling thermostats continually cycle the heating element off and on to maintain a constant inner temperature. This particular cycling thermostat has a limit of 155 degrees Fahrenheit and a differential of 25 degrees. Meaning that with this thermostat, the heating element will cut out at 155 degrees and cycle back on once the internal temperature drops by 25 degrees.


'M' Series New Style Coil Kit

This gas dryer ignition coil set comes with two ignition coils: one three terminal Boost/Hold coil, and one two terminal secondary coil. Usually only one of them burns out but you ...


Door Switch - 3 Wire

A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.


Igniter Kit

This silicone carbide igniter with ceramic holder kit includes the 3" flat igniter, bracket, 5" wire leads, and the plug. Able to replace both round and flat igniters, this kit is ...


Radiant Flame Sensor

This part senses the flame for heat allowing the gas valve to open.


Lint Filter

This filter collects lint as it passes through the dryer vent. Note: This part has been updated by the manufacturer. It may appear different but will still function the same as the...


Leveling Foot

Sold individually.


Door Catch Kit

This kit comes in two pieces: the catch and the clip.


Tri Ring

Sold individually.


Drum Felt Seal

Includes adhesive.


Drive Motor with Pulley

This motor fits most Whirlpool incorporated dryer brands before 1996. NOTE: Pulley is NOT available separately.



This screw is sold individually.


High Limit Thermostat

This hi-limit thermostat acts as a safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches a certain point, this piece will shut down power to the heating element. NOTE: As per the manufacturer this part has been updated, may look different but will function the same as the original.

All Parts for the 7MMGD6630TM0
1-14 of 140