7DU1100XTSQ1 Whirlpool Dishwasher - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Heater Element burned out
Disconnected the power. Removed the dishwasher mount screws from under the counter. Slid the Dishwasher out. Removed the two wires. Loosened and removed the two heater support nuts. Removed the heater element from inside the dishwasher. Placed the new heater element inside. Tightened the nuts. Attached the wires. Pushed the dishwasher back in place. Replaced the under-counter support screws. Reset the diagnostics message on the dishwasher front panel (This may not be necessary for some) - (Press HI TEMP > AIR DRY > HI TEMP > AIR DRY). All works great. Thank you PartSelect.com for fast shipping and great pricing.
Parts Used:
-
Travis from Los Angeles, CA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
cap was not tightened correctly melted on heating element
put new on and tightened correctly -was nice to get the right part the 1st time !
Parts Used:
-
Ronald from Pearland, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
water leak
-
douglas from Clyde, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Dishes were not dry, flashing lights.
Pulled the dishwasher out, removed 2 wires and 2 plastic nuts, removed old heating element, installed new heating element, applied nuts, connected 2 wires pushed the dishwasher back in, drank beer (Per instructions on email - really liked).
Parts Used:
-
Randy from Port Byron, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers, Wrench set
Was this instruction helpful to you?
Thank you for voting!
Not drying
-
Todd from Huntsville, AL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Water dripping from lower corners
Removal and replacement of the gasket required no tools and took very little time. However, this did not solve the problem. I called in a repairman who determined the issue was the washer was not filling to the proper level. The control board was replaced and the problem was solved. This also quieted the washer a lot in that the pump was no longer sucking air.
Parts Used:
-
William from Mt Pleasant, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Upper rack wheel assy broken
Found problem when rack fell into dishwasher. Check for parts availability on Internet and chose partselect.com. I have used them before to order a locking tab for the silverware holder. I Placed order for current problem in late afternoon and parts were in hand within 48 hours. Video instructions made repair EASY for me. I couldn't ask for better service. As my appliances age I am sure I will be using partselect.com again.
Parts Used:
-
Sammy from Lufkin, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Dish washer wouldn't start
I watched the video on your website, and I followed it to the letter. I find the service provided by this company extremely valuable to a person that is capable of doing his own repairs. Thank you, JAK.
Parts Used:
-
John from Homestead, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Original chopper assembly had broken, was rattling and debris was blocking pump to upper spray arms.
Repair was straight forward. The video description was excellent. Pay attention to where the chopper assembly sits in the cavity, there is a second location closer to the impeller, but this is not where it goes.
Parts Used:
-
Chris from Beaverton, OR
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!