6LBR7255BQ0 Whirlpool Washer - Instructions

Everything we needed was include in the Agitator repair kit to fix the problem of my agitator not turning. Easy to replace the old parts with the new. Machine works beautifully now. Happy that I only had to pay for repair kit instead of buying a whole new machine or having repair man to come and fix it. Would recommend everyone to check here first for problems with machines. Love the video that shows step by step instructions on how to install parts. Will use this website again when needed.

watched the video on line showed how to do it took about 45 min no problem

electric unplugged, removed water lines. two screws on back of control housing removed, tilted housing back, removed two clips on top of washer housing, removed body. tilted washer backward, removed brackets on water pump and electric motor, pulled motor off and removed broken parts on shaft, replaced with new parts. Lining up motor shaft to washer was a bit tricky but time and patience got it togather. replaced brackets on motor and water pump. put washer upright and put body back on the body has to be set on guides correctly or will not set right. replace clips andtilt top down and screw it. hook up water lines, and electric.

Found excellent video on website that showed all needed operations very clearly. Followed printed directions.

Follow instructions in part repair video from part select,but put washer on back first to see if can access area without removing the whole outer cover we did not even need to do that step only took 20 minutes to replace coupling. The video was great

We watched the how to video...repair took less than 15 minutes. You can't go wrong if you just watch the easy to follow video! Washer works as good as new.

The replacement part was "perfect" and the parts dept. lady I spoke with, was professional in description and correctly fitting part. The part arrived, we popped off the other where it would have fit, then the "collar" below it, put on the new collar, the dial and we were done. Before that, we'd been using a pair of pliers to move the dial around to do the laundry. This was an easy experience, quick upon arrival and we we're pleased with the purchase and how nice it is to have a working appliance again.

I followed the helpful video from PartSelect. Removal and Replacement of the Clutch Assembly was fairly easy. Just make sure you have enough towels to dry up any water that may come out after tipping the washing machine over. After Replacement the washing machine works like new. Thanks PartSelect.

Looked on line and found the cheapest repair for my symptoms seemed to be the tub wear pads. Disconnected the washer, tilted it to where I could inspect the pads and discovered one was missing. So ordered a set, (Only complaint was the shipping was as much as the part). Parts arrived in 2 Days (!). Tilted the washing machine again...reached up with a small flathead screw driver and pryed the old pads off...snapped the new ones on (takes a little pressure, so eat your wheeties)...and job done. Stood everything back up and re-connected hoses, drain and plug...Works like brand new...Unfortunately for the wife who thought she was going to get a new one....LOL

After entering the Parts Select website and searching for the model number information, I found a video which described the problem. The video explained the step by step procedure to access the possible problem. The problem was exactly as the video described, I ordered the repair part, made the repair, and placed the washer back in service. Oh, by the way, the part was delivered to my house the next day.