All Installation Instructions for Kenmore Range 62945775

The front left side burner was broken.

We lifted the glass top, uninstalled the old burner and installed the new burner in it's place. It worked right away - and is still working. No other tricks the new burner was a perfect fit.

Parts Used:

6 Inch Element with Limiter

Yelena from San Francisco, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

Was this instruction helpful to you?

Thank you for voting!

Broke arm that holds knob off switch

Removed back cover took out switch and replaced with new switch. New switch was perfect match making the repair simple

Parts Used:

Dual Surface Burner Switch

Robert from Thompsontown, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Bottom Range Bake Element.

I am a 60 year old women and I was so amazed that this was so easy, Except for whom ever put in striped screw before, got that out with a pliers. Thanks for your video online. Beautiful.

Parts Used:

Bake Element

Debra from Marshfield, WI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench set

Was this instruction helpful to you?

Thank you for voting!

When We Turned On The Oven The Temp. Reading Went Up To 425 And Beeped By No Heat

Disconnected power pulled oven from wall, removed 8 screws from back, unplugged sensor, removed old, attached new, put screws back wow saved me $500. From buying new and $150. For service call

Parts Used:

Long Oven Sensor

DAVID from Cape Coral, FL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Could not detach wires on each end of the element.

Instructions did not included need to pull oven from wall to access connections. A pro knew what to do, was finished in 10 min!

Parts Used:

Bake Element

Marlene from Merchantville, NJ
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Replace heating element in oven

Pulled out broken element, took out screws, put in the new part and inserted it.. My son had to do it though. Easy for him

Parts Used:

Bake Element

Vallie from Morrice, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Bake element broken.

Super easy; pulled out broken element and pushed in new element. Wonerful service, communication, shipping. Received part in Seattle and mailed it to Hawaii installed without a hitch. Thank you

Parts Used:

Bake Element

Maryann from Seatac, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

change oven sensor

Followed provided video

Parts Used:

Long Oven Sensor

Lloyd from Eau Claire, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

super easy

Just followed the instructions in the video!! A repair service was going to charge $95.99 just to walk in the door!!I I just ordered the igniter part. Watched the video and I know I can do that too!! I have only had one self igniting burner for years - didn't want to pay for a service call. Love your company!! Thank you!

Parts Used:

Bake Element

Joanne from West Falls, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

The inner glass shattered when the oven was in the clean mode

First I took the door off and outside to dump the glass in the trash which I had some Kevlar gloves so not to get cut. Removed the three screws on the bottom trim piece and the two on the sides remove the outside face glass next remove the four screws that hold the next glass. This glass is in a frame there is bent tab on one corner unbend open frame and install inner glass close frame rebend tab and reinstall all the parts.

Parts Used:

Inner Door Glass Pane

Charles from Sulphur, LA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

I had a power serge and it burned the Plug at the termial block and melted a few wire.

After we got the part in the mail my husband put it on and shortened the wires and put new plugs on the ends of the wires and we had to get a new plug put it on and it was fixed.

Parts Used:

Terminal Block

Robin from Vanderbilt, PA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set

Was this instruction helpful to you?

Thank you for voting!

Bake electrical element was shorted out against back pannel.

I first pulled out stove, then disconned the power supply. Then removed rear panel which exposed connections to the bake element which was shorted out against one side of the rear panel. Replaced the bake element, then the rear panel followed by pugging in the stove and pushing it back into place then opened the oven door and tested the element to see that it was working properly. Thank you Partselect for your fast service on getting the part that I needed quicky and at a fair price.

Parts Used:

Bake Element

Larry from Lake Havasu City, AZ
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Missing Oven Rack

I think the installation instructions are fairly self explanatory. This is the second item I've ordered from Parts Select and I'm thrilled with their service. The items are always less expensive than other sites and they deliver what they promise. I would highly recommend them.

Parts Used: