All Installation Instructions for Whirlpool Refrigerator 5GR2SHKXLS01

Installed new glass crisper

Open your door as far as it will go. Line it up with the plastic holder should just slide into place.

Parts Used:

Crisper Drawer Glass

Rebecca from WEST JORDAN, UT
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Cracked Meat Keeper and Crisper

Replaced drawers.

Parts Used:

Refrigerator Crisper Drawer

Meat Drawer

Theodore from Simi Valley, CA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

broken self

This was a simple install. I just replaced the glass shelf on the sliding shelf bracket.

Parts Used:

Glass Shelf

JAMES from HILTON, NY
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

the light socket broke apart

I took out the old socket by moving a clip. Reattached the electrical wires, clicked in the socket and that was it.

Parts Used:

Light Socket Kit

Elyse from Skokie, IL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

My pan crisper is broken.

The repair story webpage has some problems. I want to rate it "very helpful" but it showed "not helpful". I am pleased with the order service. It was very hard to find the parts on the web. There are a couple of web sites but only partselect has it in inventory. I ordered it, and it came in within 5 days. Excellent service. Will continue to order parts from this site in the future.

Parts Used:

Refrigerator Crisper Drawer

Raymond from Westford, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Refrigerator Trim was Bent

Ordered the new part, it was the perfect size and slipped right on to the existing brackets.

Parts Used:

Door Trim

Jeffrey from Houston, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

defective light switch

inserted a knife between the switch and the plastic interior in order to pop the switch out.
then took off the 2 wires on the old switch put them on the new switch and reinserted the switch into the plastic interior.

Parts Used:

Refrigerator Door Switch

THOMAS from WILLARD, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broken meat drawer

Replaced, fit perfect

Parts Used:

Meat Drawer

John from Elkland, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Missing shelf from refrigator that was in house I purchased.

purchased shelf, installed shelf.

Parts Used:

Glass Shelf

Doris from TUSTIN, MI
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Light switch wasn't working.. As I would close the door I would notice our frig light wasn't going off...

I simply removed the old switch by gently pulling down on the old switch with a screwdriver. When it was about half way out I just gently pulled down on the old switch and it popped out... I removed the two connectors attached to the old switch by pulling on the connectors with a pliers...I tried using my fingers but wasn't able to pull the connectors off so I used pliers. It worked perfectly.. When pulling off the old connectors, make sure you attach the new switch to the same tabs on the new switch... It was very easy to do and took under 5 mins.....The light switch works perfect....P.S. You should unplug the frig while making the connection just in case....Safety first....!!!

Parts Used:

Refrigerator Door Switch

David from Hemet, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

replacing the freezer door gasket

Definitely need to watch a youtube video on how to do it. No instructions come with the gasket so you need some instructions. Once I managed to get it started it went fairly quickly. Difficult to get it started but once it is started it is not too difficult

Parts Used:

Freezer Magnetic Door Gasket - Black

Larry from STOW, OH
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Socket set

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Installed a Ice Maker

Very easy to install

Parts Used:

ICEMAKER

Don from HOUMA, LA
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

changed the light bulb still would not work so I figured it was the switch sure enough.

I took a chance and ordered a switch that is next to the top of the door. looked for how to remove it easily done in ten minutes works fine last long time.

Parts Used:

Refrigerator Door Switch