51592 (290000001-290999999 - 2009) Toro Leaf Blower / Vacuum - Instructions

Safety First
Note: Ensure the appliance is unplug prior to working on it.

1) Removed the plate at the bottom giving access to the impeller nut
2) Removed the nut with the channel lock pliers by holding the impeller
with one hand and loosing the nut with the other.
3) Removed the old impeller and washer- impeller.
4) Install the new washer-impeller and impeller.
5) Install the new impeller nut and tighten firmly - again holding the
impeller with one hand and tighting with the channel lock pliers.
6) Install the plate at the bottom that gave you access to the impeller
nut.
7) Plug appliance in and turn selector switch to "on" position.
Note: Listen to make sure there is no erratic noises or wining coming
from the motor. If there is none, you are good to go.

Snap and blow