Models > 4LA6300XXF0 > Instructions

4LA6300XXF0 Whirlpool Washer - Instructions

All Instructions for the 4LA6300XXF0
916 - 917 of 917
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Stopped and would not restart / start.
1)Shut off power supply to dryer. 2)Removed lint filter. 3)Removed two screws that secure filter duct to dryer top. 4)Lifted front of top to gain access to door switch. 5)Removed two switch mounting screws. 6)Removed the two power leads. 7)Reconnected power leads to new switch using "Normally Closed" terminal on switch. 8)Reversed the previous procedures to complete repair.
Parts Used:
Lid Switch
  • Patricia from Duck, WV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
direct drive motor coupling was broken
Friend of mine did it well
Parts Used:
Direct Drive Motor Coupling
  • Abdel from Roswell, NM
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 4LA6300XXF0
916 - 917 of 917
Back to Top