Models > 4KUDC220T5 > Instructions

4KUDC220T5 KitchenAid Dishwasher - Instructions

All Instructions for the 4KUDC220T5
181 - 189 of 189
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
hose was cracked
old hose fell off. heated up new hose in hot water one end only and it went right on.
Parts Used:
Rubber Water Delivery Tube
  • HENRY from CHESTERFIELD, MI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The rubber delivery tube was worn out
I disconnected the tube. Before connecting the new delivery tube I softened both ends by applying heat from a hair dryer. Both ends of the tube slid right on to the ends and I was back in business!!!
Parts Used:
Rubber Water Delivery Tube
  • Mark from Deer Park, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Ordered axles to replace several originals which had broken.
The installation video is excellent. What should have been a simple fix proved to be difficult for me. Perhaps a function of not enough hand strength to "snap" the axles in place. After trying to use a screwdriver to pry open a side enough to slide on and soaking in hot water to make the axles more pliable -- neither of which worked -- I turned the rack on its side, inserted the axle in the opening and then stepped on it. Voila! That worked beautifully and the next two were easy using the "stand-on-it" method. For anyone with a similar issue as far as hand strength, I recommend this method.
Parts Used:
Single Roller Wheel Single Lower Roller Axle
  • Dee from Bryn Mawr, PA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
missing rinse dispenser cap
Sorry to say that all I did was screw the cap on in about 3 seconds. Not a repair.
Parts Used:
Rinse Aid Dispenser Cap
  • Terry from Pompano Beach, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Water Delivery Tube old and brittle and full of holes.
Watched "PartSelect" video showing how to remove the old tube and install the new one. Also read what others said about warming the tube with a hair dryer to make the rubber more flexible -- as you had to stretch the rubber to get it to go over the plastic parts that it attached to. I ordered the part around 3 PM and received it around 10:30 AM the next day. Excellent service!
Parts Used:
Rubber Water Delivery Tube
  • Donna from Dayton, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Water delivery tube was disintegrating
Remove old tube and slip new one in its place. Tube is flexible enough to do this easily. Make sure the side of the tube with the small hole faces down.
Parts Used:
Rubber Water Delivery Tube
  • Elwood from Barre, VT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Rubber Water Delivery Tube was broken
slipped the part on by hand
Parts Used:
Rubber Water Delivery Tube
  • Verna from Whitesboro, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
No water filing
Took off front panel and removed the faulty part, installed the new one and started it up.
Parts Used:
Water Inlet Valve
  • Nyleen from Penacook, NH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
The left mounting bracket had broken..
I had called an appliance repairman...I gave him the model #- he called me back in 2 seconds and said it was too old.. no parts available.. wanted to charge me $100 to come and look.I found parts select online. the part came in one day... and my handy man/put the new bracket on.. the dishwasher was put in new in 1991 and still works like a charm..thanks thanks
Parts Used:
Mounting Bracket
  • Nancy from Durham, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 4KUDC220T5
181 - 189 of 189