4KSRS25QFW00 KitchenAid Refrigerator - Instructions

merely removed old crisper holder and slid in replacement

Remove entire ice maker unit from freezer to test for function. Determined to be an electrical malfunction issue. Installed replacement ice maker unit. Easy fix, perfect fit replacement unit.

It was so simnple that I let my wife do the repair. All she had to do was to turn of the water supply and unplug the refrig. loosen two screws on top and remove one screw on the bottom of the ice maker. Gentle tilt the unit in order to unplug the electric connection on the rear of the unit and then take it out. The new unit went back the same way in reverse order.

Very easy!

Unplug appliance before making this repair and if necessary, turn water off to dispenser/ice maker. 1. Locate two slots in the bottom of the dispenser cover and pry off with a screwdriver. Remove the cover to gain access to the dispenser. 2. Unplug electrical connections to remove mount assembly, remove tape holding wire assembly. 3. Carefully slide the ice and water mini switches out of plastic mount. 3. Remove the two screws holding the mount assembly 4. Remove and replace plastic mount, re-taping wiring assembly and re-attaching water and ice switches. 5. Re-attach assembly using the two screws and carefully re-attach the cover, snapping it into place. If the water line has to be replaced, before reattaching the assembly and dispenser cover, 1. Remove the screw holding the nozzle, 2. cut the nozzle off (it won't fit through the door opening) 3. Attach the new water line to the old where the nozzle was removed (I used scotch tape) 4. remove the bottom grill 5. Notice water line exiting the bottom of the door at the hinge which is connected to a plastic connecter behind the grill 6. Disconnect the line from the connecter, removing the metal clip holding the line to the front of the refrig. (a little water may be in the line) 7. GENTLY pull the water line down through the door until the taped line is all the way through. 8. Reattach the water line at the connecter and re-attach the metal clip. 9. Re-attach new water line nozzle in the water dispenser using the screw. 10. Re-attach dispenser cover using the instructions above. 11. Check for leaks 12. Re-attach grill and enjoy.

Awesome price, awesome service, and great experience. I must say I was apprehensive about repairing my refrigerator’s ice maker, but the pieces of plastic and the $150 estimate to repair the bad part helped to motivate me into action. I quickly found the part I needed on your website at a reasonable price and placed the order. I fully expected to wait 6 – 8 weeks for the part to arrive but to my great surprise it arrived in just two days! I maintained and repaired complex ordinance and missiles in the Air Force for 21 years but a couple of steps in the repair of this icemaker stymied me, until that is, I watched your repair video! What a wonderful resource that was, step-by-step instructions on the entire repair…. Armed with this resource a guy just can’t go wrong and in short order the repair was complete and I am back to crushing ice again. What a wonderful service you provide and I couldn’t be a happier customer. You folks at Partselect.com have your stuff together, keep up the good work.
Mr. William L. Austin, M.Ed.

Just followed the video that you guys had on line . It was a very easy repair

Followed the awesome Youtube video posted by PartSelect! Gave me the confidence to do it, and I'm glad I did. Thanks everyone at PartSelect!

Repair was just like in the video, and the trouble shooting tips on here were great. The most highly probably issue for the broken bracket was exactly what my issue was. It was fixed in no time.Thanks, Tim

lined up the new part and pushed it in

I took the freezer door handle off, removed the door panel covers, removed the ice/water cover, then removed the backing to expose the tubing from the broken spout to a coupling behind the enclosure. Cut the tubing to length on the replacement tip, secured coupling, installed adn then put the door back together.

I followed the video instructions. Additionally the ordering process was easy and efficient and I received the parts promptly. Ordered on on 7/29/12 and received the parts on 7/31/12. The rep who took my order was very helpful and steered me to the right part. I'll use PartSelect again and will recommend them to my friends...ps. I have no connection whatsoever to this company.

Definitely watch the demo video. It described every aspect to remove old unit and install the new one. Made the install 'childs-play'!!

I watched the video and removed the tray, but there were no screws underneath it! We tried prying it off with no luck, and then I read the directions from another customer. We removed the door handle, pressed down on the dispensing unit while using a flat head screwdriver to pry off the dispenser unit at the bottom (There are two little slots where the screwdriver fits perfectly.) I was afraid of the thing cracking since it is so old, but it did fine. This was the only hard part. After this was off, the rest of the repair followed the video exactly and it was super easy and took about 5 minutes! As I was detaching the old control bracket, I saw that it was completely broken on the right side. I knew then that this was the correct fix. It was an incredible moment when we tested the dispenser for the first time and water came shooting out! Thanks for your help on this - I would have never dreamed doing a repair like this before, and now i know I can do it.

watched the video and went very well. No problems. I am sort of handy at repairs, and found this relatively easy.