4KSRS22QFW00 KitchenAid Refrigerator - Instructions

Removed and replaced retaining clip and installed a new strain relief. Parts arrived in 2 days from the time they were ordered. No problems whats-so-ever. Great doing business with Parts Select again.

I bought the part from Part Select and they sent a video on how to install part.

Found the part on the website (be sure to put the proper model number in)Be very watchful ofhow the bdracket come out and how the various wires go back onto the bracket. (Make a diagram on paper with colors in the proper location.

hardest part was pulling out the refrigerator. it took about five minutes. parts fit perfectly. only thing to look for is some excess flashing on the end of the tube. easily removed with a pocket knife. simple repair.

I hesitated to fix this for months, thinking it would be difficult so we just put up with a wobbly shelf (food articles would slide off occasionally) then I discovered your help videos and gained the confidence to perform the repair after watching the "how to". Now our food items are secure inside the fridge! Thanks for a great repair source!

I watched the PartSelect Video on removing and replacing the auger drum. I replaced the ice auger also. Super service from PartSelect.

Took the new chut set it into the ice dispensing openening,then cliped in place,End of repair.

ttook out old broken one and swapped the little cold air deflector to new one replaced and job done P.S. Thanks for your follow up and you speedy service. You will be certainly used as need be.

Found auger was broken. Also found the ice cubes seemed too big and not breaking apart after the ice maker would cycle and dump in to the bucket. So I adjusted the ice cubes water feed timer making the cubes smaller and they are working real good through the auger now.Thanks for delivering the part so fast.........

(1)Remove all items stored in the inner door. (2)Remove all the shelves from the inner door. (3) Remove the top hinge cover screw and remove rhe hinge cover. (4) Remove the upper hinge (5) lift the door out of the lower hinge bracket and lay flat on a table or counter top. (6) Swap out the old parts with the new parts. (6) reassemble.

replaced the cover and shelf frame and that was that!

I printed your diagram of the complete assembly for reference when installing the new part. I was able to get the part number from the diagram and ordered it online. I received the new part in 2 days. I removed the ice from the ice maker's bin and kept it in the freezer. I removed the old drum and auger from the ice maker assembly and installed the new drum #4388736. I looked at your diagram to make sure I had all of the blades in their right orientation. After the drum and auger assembly was installed, I placed the ice that I had saved into the ice bin and slide it back into place. I then tested if the assembly would now drop ice and also if it would crush the ice, which i do not use very opten, because I know that using the ice crush mode will prematurely wear the drum assembly. The drum and auger gets much more stress when it is crushing ice. After the icemaker worked flawlessly, I rolled the refrigerator back into its regular position along side the cabinets. I was very pleased with the part and the excellent service that PartSelect.com provided. The price was less than I thought I would have to pay. Also, the company provides most of the individual parts of the ice maker assembly. Normally, when I would shop at a designated Whirlpool distributor, I would have to purchase the entire assembly costing 3 or 4 times higher than the price of the individual part. I, will now, always purchase my parts from PartSelect.com.

It was so easy only took few minutes. Thanks for all the help. Fast delivery and price of replacement part much cheaper than going brought kitcken aide.

Followed the Partselect instructions - removed door, removed old cam and replaced with new cam. One lesson learned. There are two cams - one that sits on hinge below door and one that is up inside bottom of door. If you are replacing one, replace them both.

Toughtoget the ta b into the paddle but once in it was ok.