4KSRS22QFA02 KitchenAid Refrigerator - Instructions

This repair was super easy. there are only 5 screws to remove to get at the defective switch. 3 in the housing where the light bulbs are and 2 in the front trim piece where the cooling adjustment dials are. I never did unplug the fridge ,but probably should have although nothing bad happened. I removed all 5 screws using a 1/4" socket ( a nutdriver would work well also). there is also a small dia rod that comes down from the coolness adj. wheel that when you re-assemble goes though the middle of the wheel. The switch has only 2 wires that clip on with the push on flat type connectors. Very simple. I removed the wires and then the switch can be removed( it is only held in by 2 squeezable side clips). I put the new switch in and connected the wires , checked to see that the lights went on and off. which they did. then just put the screws back in.....done. also I would like to say that when I ordered my switch it came super fast. I ordered it online at 11:00am on a tuesday and it was on my doorstep in wisconsin by 10:00 am the next day...Thanks

I simply followed the video on the partselect web site on my laptop while I did the replacement and it was easy! The online videos are the greatest way to do the repairs.

Before purchasing the part, I watched the ParSelect installation video. The video gave me the insight as to my ability to replace the part and the correctness of the part for my ice bin. The video made it extremely easy and quick to replace the auger drum (propeller looking thing that pushes out the ice).

removed the ice maker and removed all the parts to see what was needed. Only needed the drum. Very easy to do yourself and received the part very quick. Completed the job in about four days due to waiting on part. The work to take apart and put back together about one hour.

It was nice to see that the replacement auger was made out of metal, I have a great sense of safety now. The part fit perfectly and works better than it did before!!! Thanks for the quick delivery and a better part. I give you guys 5 stars. Did I mention the price was right also!!!

This is a very easy fix. Begin by emptying the contents of the door. Then, just remove hinge cap and remove the three hinge screws. The door can then be lifted off the hinge pin and placed on its side. Once this is done, replace the two can pieces (one on the door and one on the frame). Then just lift the door back in place and secure the hinge. This job can be done by one person (maybe two if you need help place the door on a work surface) and will take just 15 minutes.

Replaced the output nozzle and hose that goes through the door and down under the frig.Wasnt sure if I could push new hose down through door so hooked the two hoses together so I could pull the new hose into place. To hook them together i took a short screw, cut off the head and screwed it into both hoses and put one wrap of tape around it. Pulled through the first time.

First of all when deciding where to order part from I could have saved a couple of bucks on another site but I chose PartSelect because of the video showing exactly how to install the part. When installing the new part it went in exactly as described. Part seems sturdy. Ice bin now works like new again. Hopefully it will last at least as long as the original. Part was good, delivery was quick. I will look here again if I need more parts for any appliance.

Took out the door bins, 1 bolt on the plastic cap, 3 bolts on the hinge, took the door off, replaced cam at the bottom, all same size bolts, reset the door spent longer time cleaning the door selfs all done by my self in less than 30 min. others said it helped to have second pair of hands "my wife would of just got in the way :)"

Pulled off front. Detached wires without getting electrocuted. Marked them first so I'd know where they go. Pushed up the thing with wires so I could see the flap door. It had a heat thing in the flap which my replacement part didn't have, so I had to pull it out of the broken flap and insert in the new flap. Snapped flap door in place. Attached black thing loop to white thing. DIdn't use the spring or the white thing. Reattached wires and put on front piece. Everything now works. No more frost in the freezer!!!

i wasn't sure if this piece would fix my problem until i got into it and the tabs on that side if the bracket were broke preventing the control arm from accuating the dispenser.did as the video described. took the time to do some cleaning while i had the face plate off. i am recommending partselect to all my family and friends. i would quess this saved me $150 on a repair call!

Removed the broken auger blade part,replaced it with the new one. Simple easy,and with the fast service you provided repair was accomplished quickly. Will contact your company for all of my whirlpool parts needs.

Removal of escutcheon was easy. Replacing icedoor was fairly easy, working with wires in the way was a little distracting but simple. Be careful with microswitches and locating pins. Two of mine broke, had to replace bracket. Simple job again. Everything working fine now. No ice jam in chute. Using needlenose pliers to remove/insert pin is the best and easiest option.

Figured out You have to pop off the cocer than remove the 1/4 hex head screws only not the philips ones

Lower door closing cam was completely worn down so door wouldn't close on it's own. Ordered parts which arrived in a couple of days. After watching installation video on this website the job looked pretty easy. Needed socket wrench to loosen nuts at top, they were really tight. Removed door. Replaced both the cam on the bottom of door and the cam on the main unit, put door back on making sure it was straight and lined up properly. Retightened top nuts securely. Voila, problem fixed in only about 15 minutes or so.