4KSRS22QDA00 KitchenAid Refrigerator - Instructions

Removed the two lower drawers and crisper frames as would normally be done to clean. After cleaning, replaced as normally would substituting the broken frame with the replacement. If I hadn't cleaned them and only replaced, it wouldn't have taken more than three minutes.

I removed the 3 screws but also removed the front screw of the left bin rail. This gave more room to maneuver I/M into position. The cover shown with the enclosed instructions does not show an Ice Plus (blower assy.). By removing the two mounting clips fron old unit and snapping on new one blower unit fits as original. Overall a very simple and quick repair. Note: None of the cables Inclosed were used as my harness does not unplug from wall. Thanks for the quick service PartsSelect.

I shut the unit off for about ten hours and when I turned it back on and set the temperatures for the freezer and refrigerator it has been working great.I will keep the part in case it happens again.

watched the installation video twice and took my time to make sure all parts were put back together in the right order

Turned off circuit breaker. That turns off both power and water. No need to move refrigerator. I backed out the 2 top screws about a quarter inch and then removed bottom screw with a quarter inch nut driver. I then lifted Ice Maker clear of the two top screws and lowered it enough to unclip the power connection. The new Ice Maker was wired correctly for my refrigerator so all I had to do was reconnect the power connection and mount new Ice Maker on the two top screws and install the bottom screw. It took about two hours for the new Ice Maker to start it's cycle but after it did, it worked GREAT. Part Select service was OUTSTANDING, ordered part one day and received it in two days and I live in a very remote location. Recommend PartSelect to everyone.

I followed the video on the web site. Easy squeezy.

Should have. . . . Just taken the ice maker out in the first place . . . . When I saw no ice I assumed the timer was bad. . . Replaced it. . Then when that didn't fix it again assumed that water valve was bad. . . . Replace that also to no avail. . . . Finally took out the ice maker and saw that the heater had stopped working cuz there was still ice stuck in it. . Replaced ice maker. . . All good. . . The water valve I replaced was a good thing cuz you can definatley tell the difference. . . . Anyway. . . Fixed!

replaced cam, new one broke after opening door 3 times...

Online I learned how to diagnose the problem and order the part I needed. Replacement was simple and now we have ice. It works perfect, no adjustments needed.

Removed front bearing(nut) assembled parts in correct order, the second time, attached bin front cover and all was good. Wife is happy again.

Very easy to replace. Disconnect water line. remove 2 screws pull out filler tube. replace with new one.

Spent six hours melting the ice berg, twenty minutes cleaning things up and ten minutes replacing the ice maker. The video was great the only piece of information that was missing was a statement that it may that several hours for ice to be produced. Thanks for the prompt and courteous support during ordering, a good product and support video.

A You Tube video described the repair steps and by following these instructions the whole process worked seamlessly.