Models > 3RMED4905TW0 > Instructions

3RMED4905TW0 Maytag Dryer - Instructions

All Instructions for the 3RMED4905TW0
391 - 394 of 394
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
dryer would not stop when door opened also light would not come on
Remove Lint filter remove two screws that hold lint trap to top of dryer.Use putty knife to push on two top clips that hold top of dryer down on body of dryer.Lift top and locate door wire that go to switch,romove two screws that hold switch unplug three prong connector plug in new switch and reverse disassembly instructions.
Parts Used:
Dryer Door Switch
  • Kurt from Wheeling, WV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Felt on lint filter came off.
Just put the new lint filter in.
Parts Used:
Lint Filter
  • Mike from Rocky River, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Door Latch broken
Ordered part ( door latch ) flowed instructions easily fixed same.
Parts Used:
Door Catch Kit
  • Eugene from Arlington, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Old filter screen was torn at edge of plastic rim
replaced with new one which had been improved upon by a brace down the middle of the screen.
Parts Used:
Lint Filter
  • Dan from Bluffdale, UT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 3RMED4905TW0
391 - 394 of 394
Back to Top