3RGSC9400RL1 Whirlpool Washer - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Damaged Agitator
Super easy. Pulled off the top Fabric Softener Liquid Dispenser cap. Removed the seal. Loosened and removed the bolt (You'll need a socket extension for that). Removed the gear assembly workings and the top agitator. Removed the lower main agitator. Replaced with the new one and put everything back the way it came off. I must also note that I ordered the part from Part Select.com on Monday, and received it the very next day at noon.. Without using "next-day" shipping. How is that possible??? Part Select.com is the best!!!
Parts Used:
-
Travis from Westchester, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
Was this instruction helpful to you?
Thank you for voting!
Would not spin,but would fill and drain and could hear motor and trans worked
Follow instructions in part repair video from part select,but put washer on back first to see if can access area without removing the whole outer cover we did not even need to do that step only took 20 minutes to replace coupling. The video was great
Parts Used:
-
Diana from Sherborn, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Washer wouldn't spin and we could see coupling was broken
We watched the how to video...repair took less than 15 minutes. You can't go wrong if you just watch the easy to follow video! Washer works as good as new.
Parts Used:
-
Sharon from Marina, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!