All Installation Instructions for Whirlpool Refrigerator 3ET19DKXEW00

door Shelf end cap was broken

I just snapped it into place. Easy Peasy!!!!

Parts Used:

Door Shelf End Cap - Left or Right Side

Leora O from PIERZ, MN
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

There was a crack in the Humidity Crisper drawer

I looked it up on the site per Refrigerator Model #. I wanted a confirmation from an expert at this site that I was ordering the right drawer. The part # the expert gave me was different than what I was going to order per my Model #. I'm really glad I waited for the expert reply and ordered that drawer. This is for a rental property, and we are a few hours away from the property. It was less than a minute to pull out the old crisper drawer and slide in the new. Thank You!!!!!

Parts Used:

Refrigerator Crisper Drawer

Mary from FRIDAY HARBOR, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

No problems.

Order the part and just slide the pan in.

Parts Used:

Meat Pan

Cynthia from DUCHESNE, UT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

gasket sagging at the bottom and was not airtight.

I followed the instructions on the video you provided with my order. Removed the freezer door and used the putty knife to loosen the old gasket and installed the new one. I'm a 77 year old female and if I can do it, so can you.

Parts Used:

Freezer Door Gasket

Joyce from GALESBURG, IL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

My Crisper Pan was broken so I needed a new one.

I ordered a new one waited for the new ones to come in once it did I took out the old ones and replaced them with the new ones. It was simple.

Parts Used:

Refrigerator Crisper Drawer

Debra from Lakewood, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The Light Socket Burned Out.

I pulled the socket out and unplugged the wires. I replaced the light socket by plugging in the wires and snapping the light socket into place. A very simple fix.

Parts Used:

Light Socket Kit

MATTHEW from STOCKTON, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

5 of 13 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

cracked crisper drawer

Easy ordering and installation.
Thanks.

Parts Used:

Refrigerator Crisper Drawer

JOELLE from NAZARETH, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

2 broken crisper drawers

We went online, found the part, and had it delivered to our rental house in Nags Head, NC. It was the easiest thing ever.

Thank you

Parts Used:

Refrigerator Crisper Drawer

Susan from Nags Head, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The track that held up the drawers broke

I removed the food off the glass shelf. I removed the drawer and lifted out the frame that holds the glass shelf. I removed the glass and the broker track and put in the new track. I put the glass back in then put it into the refrigerator.

Parts Used:

Crisper Drawer Rail

Harriet from Minnetonka, MN
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

My husband pulled the pan-crisper too hard and it cracked.

Replaced the part and put it in the refrigerator

Parts Used:

Refrigerator Crisper Drawer

linda from Havertown, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Cracked drawers

Replaced but drawers are lesser quality to the original drawers. Do not glide open easily

Parts Used:

Refrigerator Crisper Drawer

KATHY from ARLINGTON, VA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins

2 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Crisper Drawers were cracked

I replaced the cracked crisper drawers with the new ones just by sliding them in the bottom of the refrigerator. This did not solve the problem because one of the drawers was smaller than the other one and left a big space. When I ordered the Crisper Drawers I looked at the part diagram and it looked to me that the drawers were two different sizes and thats what I ordered. I now need to order another large drawer to finish the repair.

Parts Used:

Crisper Drawer - Clear

Refrigerator Crisper Drawer

Luke from CENTER, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Original drawer handle had cracked and the crack spread down to the body of the crisper unit.

Took out the old, cracked, crisper unit and removed the white trim piece on the handle so that we could re-use it on the new crisper unit (which, in spite of the $90+ price tag did not come with new trim). The whole thing took 3 minutes to do.

Parts Used:

Refrigerator Crisper Drawer

Scott from JAY, VT
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Light rocker switch broke and refrigerator light couldn't go on.

I just popped out the old switch with a flat head screwdriver. Removed the connections and then installed new switch by reversing steps. Popped in back in and the light went on.

Parts Used: