3ED25RQXXW00 Whirlpool Refrigerator - Instructions

Told Wife To Watch The Instructional Movie, Got Me A Beer And Watched Football. She Finished In about Thirty Minutes.Good Job

The icemaker on oour Kenmore was fading fast. Ice was only being harvested once every 4-5 hours instead of every two. Then finally it stopped altogether. I did some research and decide that it was the motor assembly that needed to be replaced. I ordered the part and within 3 days it arrived. Within 45 minutes I replaced the part with the assistance of the youtube video. I am not a Mr. Fix-it but this was fairly straight forward. I am now a hero.

I replaced the dual solenoid valve and made sure the ice cube tube was clear of any ice. Sure enough, it works and the nice old neighbor lady is happy.

I simply watched the repair video and did it! Super easy, needed start device and capacitor. As easy as unplugging the old and adding the new. The video helped and gave me confidence. Wives can fix fridges too! Saved me $2500. Looks like I'll need a new excuse if I want a new fridge.

Removed ice bin and separated parts. However, instructions would have been nice that the part to unscrew was the opposite of normal screws. Not righty-tighty, but righty remove. After I figured that out, disassembly, reassembly, and installation went smoothly. It was a pleasure to deal with your company!

Removed flap and three screws holding tray. one screw holding plug protector. Slid tray out and unplugged . Removed three screws holding control & motor assembly.Put new unit in reassembled.

Watched video on Part Select, ordered part,it arrived in three days installed same fifteen minutes had ice within one hour.Saved $300.00.Thanks Part Select.

We used the video out on YouTube to show us how to replace the drum. It made the repair go so fast that we were amazed that two klutzes could do this repair! Remove the screws that hold the housing together. Place the screws in a cup to keep everything together. Remove the spiral unit and the plastic sleeve. The hardest part was removing the auger nut on the assembly. Just remember it is a left hand turn. After that, remember sequence of the blade assembly. The video suggested that you take a picture and that would help remembering the sequence of the blades. Follow the video!

Replaced with new ice machine. Three screws to take out ice machine, took off water lines put new one in. Could not be easier.

This repair was super easy. there are only 5 screws to remove to get at the defective switch. 3 in the housing where the light bulbs are and 2 in the front trim piece where the cooling adjustment dials are. I never did unplug the fridge ,but probably should have although nothing bad happened. I removed all 5 screws using a 1/4" socket ( a nutdriver would work well also). there is also a small dia rod that comes down from the coolness adj. wheel that when you re-assemble goes though the middle of the wheel. The switch has only 2 wires that clip on with the push on flat type connectors. Very simple. I removed the wires and then the switch can be removed( it is only held in by 2 squeezable side clips). I put the new switch in and connected the wires , checked to see that the lights went on and off. which they did. then just put the screws back in.....done. also I would like to say that when I ordered my switch it came super fast. I ordered it online at 11:00am on a tuesday and it was on my doorstep in wisconsin by 10:00 am the next day...Thanks

Just replaced the thermostat and is working perfectly. I would have to tap cooler knob and it would kick on. when it ran it ran well. So i knew it had to be electrical.Put in new thermostat and is working great!

Watched the video, followed the instructions, took my time and paid attention to what came off where, and viola. Not quite as easy as the guy in the video, but then it was my first time! Bottom line is: it worked. Refrigerator/freezer now maintains temperature exactly as expected, and I saved hundreds. Thank you!

Did troubleshooting as manuel indicated. Had same problem once before. The replacement did the trick.

I simply followed the video on the partselect web site on my laptop while I did the replacement and it was easy! The online videos are the greatest way to do the repairs.

I watched the video provided on your website and followed the directives. It was just as easy and simple as noted in the video.