Models > 3ED25RQXXW00 > Instructions

3ED25RQXXW00 Whirlpool Refrigerator - Instructions

All Instructions for the 3ED25RQXXW00
1156 - 1170 of 1271
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Freezer not cooling.
Followed the video, very helpful! Basically a walk in the park.
Parts Used:
Thermostat Assembly
  • David from Ringwood, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Thermostate would either Stick "ON" or "OFF"
Unplugged Refer...Cleared top shelf...removed screws/covers to expose thermostate and capilary tube...removed old thermostate takeing care to notice how Capilary tube was routed and electrical connection were made (wire color coding)...removed sheath on old capilary tube and installed on new, always making sure to not "kink" tubing...installed new part just as the old one was...plugged refer back in and enjoyed trouble free operation.
Parts Used:
Thermostat Assembly
  • Richard from Sunnyside, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Ice Maker Bit It
I recieved the part from part select right away. While I was ordering I noticed a video I could watch on how to make the ice maker replacement part work. I was very pleased and the repair was a snap. Thanks alot for the help and the prompt service.
Parts Used:
Replacement Ice Maker
  • Donna from Burns, OR
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
ice maker water leak
followed instructions provided. real easy. also installed new filter. forgot to flush the filter.
Parts Used:
Replacement Ice Maker
  • John from Woodinville, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Ice Maker stopped making ice
The ice maker stopped making ice. Cold water was still available at the freezer door dispenser which seemed to isolate the problem to the ice maker control board/motor. My ice making unit was not identical to the one in the video, but close. After disconnecting the power, I was able to replace the control board/motor without having to remove the entire ice making unit. Total time for repair was under 15 minutes.
Parts Used:
Icemaker Control Assembly
  • Robert from Santa Maria, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Ice maker stopped making ice.
Undid the bolts to the ice maker, unplugged it and took it out of the freezer. Removed the cover, unplugged the motor and unscrewed the motor from the casing. To install new motor screw it into the casing, plug it in and replace the cover.
Parts Used:
Icemaker Control Assembly
  • Michael from West Palm Beach, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
ice maker not working
It was not the icemaker, instead it was the water inlet valve. I had ice in one hour. The biggest problem was getting the refrigerator from against the wall.
Parts Used:
Replacement Ice Maker
  • Deborah from Jacksonville, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Wrench set
Was this instruction helpful to you?
Thank you for voting!
Quit making ice
Loosen two top screws and removed one bottom screw and unplugged the old ice maker. Installed old arm on the new ice maker and plugged in new ice maker to the existing plugs and reinstalled new ice maker. Dumped ice in about one and a half hours. Full bin within 72 hours. Super easy.
Parts Used:
Replacement Ice Maker
  • Tim from Red Oak, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Light bulb failure
Received the part the day after ordering. Appreciated the quick service and repair took less than a minute.
Parts Used:
Light Bulb - 40W
  • Grant from Alexandria, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Part broke inside ice cube tray
Using instructions found on the internet and the illustrated parts breakdown it was just a matter of following instructions.
Parts Used:
Nut, Bearing
  • Loren from Reeds Spring, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
Was this instruction helpful to you?
Thank you for voting!
fresh food side not getting cold
I wasnt about to call Mr Appliance of Bayport NY the last time I called him I got a bill for $72.00 and he told me I needed a new frig. So I paid him then the next day I went to parts select and fixed it myself for about $50.00 But this time it was my Moms frig and the frig side (fresh food side) wasnt getting cold So again I went to parts select and put in a bimetel thermostat and it works perfect now. Im sure I saved a lot of $ and thanks to parts select, They helped me diagnose the problem and make the repair step by step! EASY! Thanks parts select...Garry from long island NY
Parts Used:
STUD-SHELF
  • Garry from Sayville, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Timer Was Hanging Up
Shut off power,(breaker box), removed the ice container, this had the crusher, makes it easey to remove the timer assy, loosened up the upper hex head screws, removed the lower phillips screw. Dis-connect the feed wire assy. I elected to dis-connect first at the timer unit. Remove the timer cover, then access to the wire connecter,remove the heater unit on the side of the of water pan. Drop the unit out and if necessary change the wire loom at back of refrig-, install new loom if necessary, reverse process on ice unit. Took about 45 minutes +-, marked the timer dial, see if I got rotation, etc. There is ports on the face of the timer to check voltage's. Now will install new water valve , and water filter to make sure all is back to normal. Made ice on start up, excellent service, parts are great, with necessary information. Thanks, bill.
Parts Used:
Replacement Ice Maker
  • WILLIAM from TERRE HAUTE, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Runs & Does Not Cut Off, Freezes Everthing
Watched The Movie, Told Wife What To Do
Parts Used:
Water Fill Cup and Bearing Thermostat Assembly
  • Charles from Waco, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
qquit working a year ago
Thought it would be difficult to replace and expensive. Very easy after all.
Parts Used:
Replacement Ice Maker
  • jeff from lawrenceburg, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
would not espense ice cube or crush them
ordered a new auger after tearing it apart I found I needed a drum. Thought this might be too much work so I went to Lowes for a new ice maker they sold me the wrong one said the didnt have one & I needed to order, they sent the wrong part. So I ordered the drum from you. So her is a pile of parts that has been settin there for a week. The secret was the video Great Job everything works & I tell everyone how smart I am with your help. THANKS
Parts Used:
Ice Bin Auger Drum
  • Joe from Maryville, TN
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 3ED25RQXXW00
1156 - 1170 of 1271