Mon-Fri: 7am-1am EST / Sat-Sun: 7am-11pm EST
Below is a list of all parts for the Whirlpool Ice Maker 3ECKMF87 - Kit. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.
This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. Motor is not sold separately.
This kit comes with a fill tube and a compression nut.
This tubing is 1/4'' in diameter and comes with 2 inserts. This tubing may be longer than the original, and may have to be cut.
This part is also known as the cycling thermostat and this bi-metal device controls the activation of the icemaker ejection cycle.
This compression nut is used with the plastic water line of the icemaker assembly.
This part strips ice from the icemaker mold during the ejection cycle to prevent ice pieces from falling back into the mold.
These tube clamps are sold individually. The screw is not included.
Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".
These inserts are used with 1/4 inch plastic tubing.
When the shut off arm is high enough the ice maker will shut off and no more ice will be made until the level of the ice in the bin drops. Also the ice maker can be turned off by lifting the arm all the way to the top until in a locked position.
This screw is sold individually.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2015 , Eldis Group Partnership. All rights reserved.