Models > 362.7352892

362.7352892 Kenmore Range - Overview

Get Parts and Repair Help for 362.7352892

If you know the range repair part you need, you can browse the list of all parts on the 362.7352892, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for 362.7352892 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Models starting with 362.7352892

$2.52

Light Bulb - 40W

Sold individually.

$67.93

Round Style Oven Igniter

Be very careful when handling this igniter as it is very fragile. This igniter has a range of 2.5 to 3.0 amps. Please note - this will not replace the flat style igniters. Also known as bake and broil igniter.

$41.27

Oven Rack

Sold individually.

$5.55

Oven Light Socket - With Push In Receptacle

$4.41

Light Cover

$2.36

SCREW

Sold Individually.

$4.21

SCREW

$45.93

Burner Head - Large

$10.89

SCREW-PKG 12

$3.56

ARM ANTI TIP

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

No ignition

  • Customer: Mark from Upland CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 475 of 479 people found this instruction helpful
Unplug the oven.
Open the oven door.
Remove the racks.
Remove the two screws that hold the oven floor; they are located toward the back.
Remove the oven floor pan.
Remove the screw holding the heat shield/dispenser.
Remove the heat shield/dispenser.
Untwist the ceramic wire caps on the two igniter wires.
Remove the two... read more

broiler works, bake oven does not work.

  • Customer: Robert from Hebron CT
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers, Socket set, Wrench set
  • 511 of 683 people found this instruction helpful
Your website help me troubleshoot the problem and locate the part. Part was delivered the next day. Following the instructions that others on your website had provided, the repair was quick and SUCCESSFUL.
Gas will not flow if the igniter is bad. Gas will only flow if the igniter heats up the internal bimetal strip which in turn, allows gas to flow t... read more

Oven igniter failed to heat up and ignite the gas burner.

  • Customer: Paul from Santa Rosa CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 300 of 454 people found this instruction helpful
Before starting it's a good idea to disconnect the electricity and turn the gas valve off behind the stove.

Next, uncrew the two finger-screws at the back of the oven that hold the porcelain & steel drip plate in. It comes out if you push it towards the back of the oven and lift it out. This reveals the burner and the cylindrical igniter attac... read more