31FN-10XS-ON Magic Chef Range - Instructions
Sections
Parts
Questions & Answers
Symptoms
Videos
Instructions
All Instructions for the 31FN-10XS-ON
original light grey color grates stained and unsightly--no amount of scrubbing or cleansers would make them look nice.
Opened the box and took out the black color grates~~removed discolored grates and put the new ones on. Looks like a brand new stove and much nicer to look at as it is the first thing you see when you enter the kitchen.
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
15 of 21 people
found this instruction helpful.
Thank you for voting!
leak
removed then installed new unit by hand. received order the next day-am. delivery time great.
Parts Used:
George from Plainville, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
12 of 14 people
found this instruction helpful.
Thank you for voting!
Purchased home but stove had no broiler pan.
Purchased 2 piece broiler pan from this site
Parts Used:
Raymond from BLOOMINGTON, MN
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
14 of 20 people
found this instruction helpful.
Thank you for voting!
spring broke on one side of door hinge
Pulled the stove out, removed the sides and attatched the new springs( replaced both while the stove was out). Worked like new and put the stove back.
Parts Used:
Travis from Lexington, OK
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
13 of 18 people
found this instruction helpful.
Thank you for voting!
the burner knobs broke off
I put the 2 burner knobs on and now I have 4 working burners....Thanks for the quick delivery....
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
10 of 17 people
found this instruction helpful.
Thank you for voting!
Door Spring Broke
Removed 7 screws on sides and one on top of stove. Replaced both springs (only one was broken but did both). Took around 15 to 30 minutes from start to finish.Fastest shipping in history during holidays without paying anything extra.
Parts Used:
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
7 of 9 people
found this instruction helpful.
Thank you for voting!
30 year old gas stove needed a new burner assembly.
We lifted up the stove top, slipped the burner assembly in. It fit! who knew that we could get a part to an old stove without the model number, just by looking at a picture of the part! Terrific!
Parts Used:
Caroline from South Windsor, CT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
6 of 7 people
found this instruction helpful.
Thank you for voting!
Gas manifold had holes in it.
Removed locking wire from bottom burner assembly then I pulled the element out and replaced with the new one.
Parts Used:
Mr. J.C. from Haines City, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
5 of 6 people
found this instruction helpful.
Thank you for voting!
A high flame was coming out of the side of the burner
Easy......pulled out the old one easily and popped in the new one.......saved a lot of money...no repair bill for either diagnostic fee or assembly fee ...No mark up for the part either. Very happy mom!
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
5 of 7 people
found this instruction helpful.
Thank you for voting!
light bulb in water ice freezer door went bad
I didn't. Don't know how to get to light bulb to change it for this specific model
Parts Used:
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
7 of 13 people
found this instruction helpful.
Thank you for voting!
Replacing the bulb in the freezer side
Removed the ice brucket, Removed the light shield by releasing one screw using a nutdriver. Replacing the bulb and reinstalled the light shield. Your web site is one of the best and most helpfull service sites I ever used. Just wish that in the future you will ship parts overseas.
Parts Used:
Yafa (and David) from Bothell, WA
Total Repair Time:
Less than 15 mins
5 of 10 people
found this instruction helpful.
Thank you for voting!
Freont Burners Of Both Units Had Rusted Though Over The Years Of Boilover.
Lifted lid, removed old burner units, replace with new ones. In less than two min. Was back up and cooking.
Parts Used:
Angelo W. from Chirfland, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
3 of 4 people
found this instruction helpful.
Thank you for voting!
Stove top had burnt marks from long use
Just replaced the top. No tool or repair was needed. Parts arrived earlier than promised, so it was awesome!
Parts Used:
MEEWAN from BUENA PARK, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
3 of 4 people
found this instruction helpful.
Thank you for voting!
Broken burner knobs on stove.
Just replaced the old burner knobs with the new !!!
Parts Used:
Barbara L. from Tewksbury, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 3 people
found this instruction helpful.
Thank you for voting!
Install valve knobs
This was not a difficult task. I just slid the valve knob on the shaft, repair was complete. This was a very easy diy project.
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
3 of 6 people
found this instruction helpful.
Thank you for voting!
All Instructions for the 31FN-10XS-ON