Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 25358082898 > Parts

25358082898 Kenmore Refrigerator - Parts

All parts for the Kenmore Refrigerator 25358082898

Below is a list of all parts for the Kenmore Refrigerator 25358082898. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the 25358082898
15-28 of 372
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.50

Door Shelf End Cap - Right Side

$3.58

Door Shelf End Cap - Left Side

$27.58

Dual Inlet Water Valve - 120V 60Hz

The water inlet valve is a solenoid-operated switch and when it is energized by electrical power, water is released from the supply line through the water valve and into the compac...

$21.67

Handle Mounting Block

Sold individually.

$8.82

GEAR

The ejector drive gear is a part for your refrigerator. This icemaker drive gear is for the ejector blades. The part rotates the cube ejector arm, which cycles the icemaker and pus...

$6.34

Hexagonal Screw

Sold individually.

$4.38

Screw

Cross Recessed Pan Head Screw Size: 10-16 X 0.500

$27.48

Evaporator Fan Blade

This evaporator fan blade is a genuine OEM part that is sourced directly from the manufacturer. The evaporator fan blade circulates air through the refrigerator to control the amount of cold air goes that goes to internal compartments of the unit. It may need to be replaced if the fridge is noisy or not cold enough. This part is made of plastic and is sold individually. It will be necessary to disconnect power to the refrigerator and empty the freezer compartment of the refrigerator. The tools needed to complete this repair are a 1/4 inch nut driver and a pair of needle nose pliers.

$6.52

Pan Head Screw

Sold Individually. Order quantity required.

$82.54

Upper Crisper Drawer

The front for this part is sold separately or you can use your existing part.

$6.55

SCREW

Sold individually.

$5.96

ICE STRIPPER

The ice stripper goes on the front of the ice maker and directs the ice cubes from the maker to the bin. Due to the frigid temperatures, the plastic breaks down and cracks from time to time. This may cause the ice cubes to get stuck in the ice maker and not dispense properly. You will need to open the freezer door, pull out the ice container by lifting and pulling out. Unplug the ice maker by releasing the locking tabs. Use your 1/4-inch nut driver to remove the screws holding the ice maker in place. Take the ice maker out of the freezer for easy access. The ice stripper can be removed by simply unlatching from the pin holding it in place. The new ice stripper should just click into place so the tab goes into the control head with ease.

$12.00

SPACER-FIXED BLADES

$8.15

Touch Up Paint - White

This is white touch up paint for refrigerators, microwaves, ranges, dryers, and freezers. It is used to cover, or touch up, nicks and scratches on the appliance from wear and tear. It is an 18ml bottle that contains paint and a small brush for easy application. It is a little over 2 inches tall. This is an OEM part that is sourced directly from the genuine manufacturer, and is meant to be an exact match to the color of the appliance. If the appliance is not white, please see other colors such as almond or black.

All Parts for the 25358082898
15-28 of 372