25358082898 Kenmore Refrigerator - Instructions

The main water valve did not open when we wanted to get water out from the refrigerator, nor did any water get delivered to the ice maker when it called for water (to make ice cubes).

Replaced the bad inlet water valve, and we are back in business....

Just as the instructions showed. opened the refrigerator, removed the water filter cover. removed the old filter and installed the new one. Very easy to do.

I replaced the entire dispenser. I decided it would probably be cheaper in the long run than replacing parts, thus lasting much longer. One thing I would like to comment regarding Part Select is that in all my years of ordering I have never recieved delivery any faster. I ordered one morning and part was delivered the next.

1-Unpluged the refrigerator 2- removed ice cube tray and some food( Placed in cooler )3- unscrewed the two screws holding the old unit lowering it and unplugged it. 4- Had to loosen the cooling coil to get to the pass through hole in the back and pulled the old wire out. Connected the wire adaptor to the old connectorand to the new ice maker. At this point I couldn`t pass the new plug through the back so I strapped it out of the way and installed the new ice maker using the two screws from the old one. Adjusted the fill adjustment and turned it on. Cubes in about 4 hours.

put in a new one

I watched the video and did the same thing on mine and now it is working fine

Website was great!

The defrost timer was right in front. 2 minutes and a screwdriver and I had it replaced.

To replace the thermostat, I had to take out the back panel, defrost it and then install the new part. the only problem was that the heatshrink tubing they sent was too large. Otherwise, it worked great.

According to the online video instructions.

Removed two screws to get to defrost time pull panel down remove two screws holding time and reinstall

I needed one with the adapter. I installed it and there was ice in the tray the next morning...no problem

Used Old Screws And a nutdriver

took door off. sanded rusting hinge and greased. installed door hinge washer. I had to install a larger washer over hinge bearing to help support the door where it was rusting. no sweat. works like its new. thanks to you guys for having the parts.

Just a firm twist on the covering and insert new filter. This is the second time in 2 weeks that I have ordered parts from PartSelect. The best service I have ever had. Recieved parts the next day.

just like the video showed...it was excellent!!!

original was 1/4 and new one is 3/8, I had to buy another adapter to fit 3/8 but that didn't fit too well either, I eventually had to wrap with tapes around the hose so it would be tighter, at least it's not leaking anymore.