Models > 25353612300 > Instructions

25353612300 Kenmore Refrigerator - Instructions

All Instructions for the 25353612300
736 - 750 of 1012
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
water valve leak
Easy to assemble after cutting original water line fittings off. Use sharp knife to keep from damaging end of water lines.
Parts Used:
Refrigerator Water Inlet Valve
  • Donald from Wilmington, NC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
broken suport for pam
take of the tray & take parts out & installed the new ones
Parts Used:
Crisper Support - Rear
  • JORGE from HOUSTON, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Refrigerator door "clicked" when opening.
Removed the nuts on top - to loosen the door. Lifted the door off the hinge. Took out old part, put in new one, reinserted door, replaced nuts.
Parts Used:
Door Closing Cam Hinge Bearing
  • Clinton from Conyers, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Wrench set
Was this instruction helpful to you?
Thank you for voting!
One side of door shelf bin broke.
I originally ordered the wrong part (for the freezer side). Received the part on Saturday--I had ordered on Thursday afternoon. Discovered my error and got on line to see how to return and ordered the correct part. This part came on Tuesday morning. I put the part on the door and was finished in no time! Great service and easy return for my wrong order. Thanks.
Parts Used:
Door Shelf
  • Janeen from Houston, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Filter cup leaking and fridge door sticking (bearing missing)
Not much to describe of my installation. When I ordered the parts from PartSelect (which was so easy to find and received in two days) I took a few minutes to watch the tutorial on how to replace. I was an expert before even receiving the parts. Go Tutorial!
Parts Used:
Filter Cup and Housing Assembly Hinge Bearing
  • Domenic from San Clemente, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
broken hinge bearing
replaced hinge bearing and cam
Parts Used:
Door Closing Cam Hinge Bearing
  • JAMES from SURPRISE, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Wrench set
Was this instruction helpful to you?
Thank you for voting!
The Plastic Tabs that hold the shelves are too thin/small
The shelve bin tabs broke because they don't snap in properly so they get knocked out occasionally. They hit the floor and if what's in the door is heavy and lands on them they break. Snapping in a new one is not a problem, it's ordering/paying/shipping/waiting. They need re-designed so they fit more securely.
Parts Used:
Crisper Drawer Cover - NO Glass Door Shelf
  • Cheryl from Huntsburg, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
broken crisper drawer
just pull out broken crisper, and push in new crisper drawer.
Parts Used:
Upper Crisper Drawer Cover - Glass NOT Included
  • MORGAN from ARCADIA, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Broken door shelf
Remove broken shelf and install new shelf. And that's it
Parts Used:
Door Shelf Refrigerator Door Bin
  • robert from virginia beach, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
both bottom door bins broken
the parts where a perfect match and they snapped in place
Parts Used:
Refrigerator Door Bin
  • Brenda from Conyers, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Hinge Bearing was worn
Watched the tutorial and I would say it took longer to clean the condiments from the door and take the shelves out than the repair. The easiest repair in my life.
Parts Used:
Door Closing Cam Hinge Bearing
  • ERIC from DEKALB, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
water running over ice machine and into kitchen
Called a repair man. He said it was a a sensor type valve at the bottom back of fridge and he would have to order. He never called us, so we went to website and ordered it. Replaced it. It WAS obviously burned out/dicolored. Bracket had to be redone, as it wasn't standard. Didn't work. Ordered new icemaker. Worked like a charm. Video for installing icemaker very helpful. He called a couple weeks later and we already had it fixed.
Parts Used:
Replacement Ice Maker
  • Mary from Black Hawk, SD
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Was this instruction helpful to you?
Thank you for voting!
Bin Broke
My warranty didn't cover these types of breaks, so I found this website (PartsSelect.com) (it was 1/2 the price of Frigidaire who said no one else made it). Make sure you get the right bin as the bottom two are the same ones. Anyway, it fit perfectly, was in great clean condition, and I haven't had any issues with it since. The shipping time was nominal. I'm in Virginia. I'd buy another part from them any day.
Parts Used:
Refrigerator Door Bin
  • Gregory from Chantilly, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
door shelf
took longer to open the door than to install. Perfect replacement part
Parts Used:
Refrigerator Door Bin
  • gary from lockport, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Ice Maker replacement
Went well overall. I really thought that you guys taking the time to create a very helpful video was awesome. Thanks for doing that! The only difficulty I had was that my old ice maker had the connection toward the front, while the new one was in the back. So I had to use the adapter and had so much extra wiring to bundle, and tie wrap, with little place to go with it that I got frustrated. Wish I just had the correct replacement wire to begin with. Nonetheless, we are stocked with a full bin of ice after about 3-4 days.
Parts Used:
Replacement Ice Maker
  • Dan from New Berlin, WI
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 25353612300
736 - 750 of 1012
Back to Top